GB/T 9816.1-2013 Replaced National standards

GB/T 9816.1-2013 Thermal-links—Part 1:Requirements and application guide

GB/T 9816.1-2013 Thermal-links—Part 1:Requirements and application guide

Publish Date: 2013-12-31 Implement Date: 2015-07-13 For services related to genuine standard inquiry, procurement, translation, and other related services in China, please Contact Us

Basic Information

Standard Code: GB/T 9816.1-2013

Standard Type: National standards

Standard Status: Replaced

is_force_gb: no

CCS Name: Low-voltage distribution electrical equipment

ICS Name: Fuses and other overload protection devices

Publish Date: 2013-12-31

Implement Date: 2015-07-13

Pages: 33 pages

Scope

This part of GB 9816 specifies the classification, marking, mechanical requirements, electrical requirements, temperature tests, and technical requirements for rust prevention of thermal fuses.
This part is applicable to electrical and electronic equipment and similar components installed in general indoor environments, used to prevent them from overheating in the event of a fault.

Development Information

Word Count: 56 Thousand words Pages: 33 pages

Replace the following standards

GB 9816-2008 Thermal-links—Requirements and application guide

Superseded by the following standards

GB/T 9816.1-2023 Thermal-links—Part 1:Requirements and application guide

Referenced Standards

GB/T 4207-2012 Method for the determination of the proof and the comparative tracking indices of solid insulating materials GB/T 5169.11-2006 Fire hazard testing for electric and electronic products—Part 11:Glowing/hot-wire based test methods—Glow-wire flammability test method for end-products GB/T 5169.16-2008 Fire hazard testing for electric and electronic products—Part 16:Test flames—50 W horizontal and vertical flame test methods GB/T 5169.17-2008 Fire hazard testing for electric and electronic products—Part 17:Test flames—500 W flame test methods GB/T 5169.19-2006 Fire hazard testing for electric and electronic products—Part 19:Abnormal heat—Mould stress relief distortion test GB/T 5169.21-2006 Fire hazard testing for electric and electronic products—Part 21:Abnormal heat—Ball pressure test GB 8898-2011 Audio,video and similar electronic apparatus—Safety requirements GB/T 11021-2007 Electrical insulation—Thermal classification GB/T 11026.1-2003 Electrical insulating materials-Properties of thermal endurance—Part 1:Ageing procedures and evaluation of test results GB/T 14536.1-2008 Automatic electrical controls for household and similar use—Part 1:General requirements GB/T 16935.1-2008 Insulation coordination for equipment within low-voltage systems—Part 1:Principles,requirements and tests GB/T 17196-1997 Connecting devices—Flat quick-connect terminations for electrical copper conductors—Safety requirements

Adopt standards

IEC 60691:2002

Related Standards

GB 13539.4-1992 Replaced

GB 13539.4-1992 Low-voltage fuses—Supplementary requirements for fuse-links for the protection of semiconductor devices

Publish Date: 1992-07-01

GB 13955-1992 Replaced

GB 13955-1992 Installation and operation of residual current operated protective devices

Publish Date: 1992-12-19

GB 14285-1993 Replaced

GB 14285-1993 Technical code for relaying protection and security automatic equipment

Publish Date: 1993-04-10

GB 14287-1993 Replaced

GB 14287-1993 Residual current operated alarm devices for fire prevention

Publish Date: 1993-04-10

GB 15166.2-1994 Replaced

GB 15166.2-1994 Alternating-current high-voltage fuses Current-limiting fuses

Publish Date: 1994-08-18

GB 15166.3-1994 Replaced

GB 15166.3-1994 Alternating-current high-voltage fuses Expulsion fuse

Publish Date: 1994-08-18