GB/T 5169.11-2006 Replaced National standards

GB/T 5169.11-2006 Fire hazard testing for electric and electronic products—Part 11:Glowing/hot-wire based test methods—Glow-wire flammability test method for end-products

GB/T 5169.11-2006 Fire hazard testing for electric and electronic products—Part 11:Glowing/hot-wire based test methods—Glow-wire flammability test method for end-products

Publish Date: 2006-12-19 Implement Date: 2007-09-01 For services related to genuine standard inquiry, procurement, translation, and other related services in China, please Contact Us

Basic Information

Standard Code: GB/T 5169.11-2006

Standard Type: National standards

Standard Status: Replaced

is_force_gb: no

CCS Name: Basic standards and general methods

ICS Name: Comprehensive Electrical Engineering

Publish Date: 2006-12-19

Implement Date: 2007-09-01

Pages: 9 pages

Scope

This part of GB/T 5169 specifies in detail the glow-wire test applied to finished products in the fire hazard test. In this part, finished products refer to electrical equipment and its components and parts. One of the tasks of the Standardization Technical Committee is to use these basic safety publications wherever applicable when preparing its own publications.

Development Information

Word Count: 13 Thousand words Pages: 9 pages

Same series standard

GB/T 5169.9-2006 Fire hazard testing for electric and electronic products—Part 9:Guidance for assessing the fire hazard—Use of preselection testing procedures GB/T 5169.10-2006 Fire hazard testing for electric and electronic products—Part 10:Glow/hot-wire based test methods—Glow-wire apparatus and common test procedure GB/T 5169.12-2006 Fire hazard testing for electric and electronic products—Part 12:Glowing/hot-wire based test methods—Glow-wire flammability test method for materials GB/T 5169.13-2006 Fire hazard testing for electric and electronic products—Part 13:Glowing/hot-wire based test methods—Glow-wire ignitability test method for materials GB/T 5169.19-2006 Fire hazard testing for electric and electronic products—Part 19:Abnormal heat—Mould stress relief distortion test GB/T 5169.20-2006 Fire hazard testing for electric and electronic products—Part 20:Surface spread of flame—Summary and relevance of test methods GB/T 5169.21-2006 Fire hazard testing for electric and electronic products—Part 21:Abnormal heat—Ball pressure test

Replace the following standards

GB/T 5169.11-1997 Fire hazard testing for electric and electronic products—Test methods—Glow-wire end-product test and guidance

Superseded by the following standards

GB/T 5169.11-2017 Fire hazard testing for electric and electronic products—Part 11:Glowing/hot-wire based test methods—Glow-wire flammability test method for end-products(GWEPT)

Referenced Standards

GB/T 5169.5-1997 Fire hazard testing for electric and electronic products Part 2:Test methods Section 2:Needle-flame test GB/T 5169.10-2006 Fire hazard testing for electric and electronic products—Part 10:Glow/hot-wire based test methods—Glow-wire apparatus and common test procedure ISO/IEC 13943:2000

Adopt standards

IEC 60695-2-11:2000

Related Standards

GB/T 2681-1981 Abolished

GB/T 2681-1981 Colors of insulated conductors used in electrical assembly devices

Publish Date: 1981-06-12

GB/T 2682-1981 Abolished

GB/T 2682-1981 Colors of indicator lights and push-buttons used in electrical assembly devices

Publish Date: 1981-06-12

GB/T 3926-1983 Replaced

GB/T 3926-1983 Rated voltage for medium frequency equipment

Publish Date: 1983-11-11

GB/T 4064-1983 Abolished

GB/T 4064-1983 General guide for designing of electrical equipment to satisfy safety requirements

Publish Date: 1983-12-22

GB/T 4776-1984 Replaced

GB/T 4776-1984 Electrical safety terminology

Publish Date: 1984-11-30

GB/T 5080.4-1985 Active

GB/T 5080.4-1985 Equipment reliability testing—Procedure for point estimates and confidence intervals from reliability determination tests(Exponental distribution)

Publish Date: 1985-04-17