GB/T 13282-1991
Abolished
GB/T 25918-2010
Active
National standards
GB/T 25918-2010 Portable calibration instrument for water meters
GB/T 25918-2010 Portable calibration instrument for water meters
Basic Information
Standard Code:
GB/T 25918-2010
Standard Type:
National standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Flow and level measurement instruments
ICS Name:
The measurement of flow rate in a closed pipeline
Publish Date:
2011-01-14
Implement Date:
2011-05-01
Pages:
12 pages
Scope
This standard specifies the terms and definitions, general requirements, metrological requirements, technical requirements, test methods, test rules, and marking, packaging, transportation, and storage of portable water meter calibrators (hereinafter referred to as water meter calibrators).
This standard applies to portable water meter calibrators that use the standard meter method and have a maximum flow rate of less than 16 m3/h.
Development Information
Referenced Standards
GB/T 321-2005 Preferred numbers—Series of preferred numbers
GB/T 778.1-2007 Measurement of water flow in fully charged closed conduits—Meters for cold potable water and hot water—Part 1:Specifications
GB/T 778.3-2007 Measurement of water flow in fully charged closed conduits—Meters for cold potable water and hot water—Part 3:Test methods and equipment
GB/T 4208-2008 Degrees of protection provided by enclosure(IP code)
GB/T 13384-2008 General specifications for packing of mechanical and electrical product
GB/T 15479-1995 Technical requirements and test methods of insulation resistance and insulating strength for use in industrial process measurement and control instruments
OIML D11:2004
GB/T 191-2000 Packaging—Pictorial marking for handling of goods
GB/T 191-2008 Packaging—Pictorial marking for handling of goods
GB/T 2423.2-2001 Environmental testing for electric and electronic products—Part 2:Test methods-Tests B:Dry heat
GB/T 2423.2-2008 Environmental testing for electric and electronic products—Part 2:Test methods—Tests B:Dry heat
GB/T 2423.4-1993 Basic environmental testing procedures for electric and electronic products—Test Db:Damp heat, cyclic
GB/T 2423.4-2008 Environmental testing for electric and electronic products—Part 2:Test method—Test Db:Damp heat,cyclic(12 h+12 h cycle)
GB/T 2423.7-1995 Environmental testing for electric and electronic products Part 2:Test Ec and quidance:Drop and topple (Primarily for equipment-type specimens)
GB/T 2423.7-2018 Environmental testing—Part 2:Test methods—Test Ec:Rough handling shocks,primarily for equipment-type specimens
GB/T 17626.2-1998 Electromagnetic compatibility—Testing and measurement techniques—Electrostatic discharge immunity test
GB/T 17626.2-2006 Electromagnetic compatibility—Testing and measurement techniques—Electrostatic discharge immunity test
GB/T 17626.2-2018 Electromagnetic compatibility—Testing and measurement techniques—Electrostatic discharge immunity test
GB/T 17626.3-1998 Electromagnetic compatibility—Testing and measurement techniques-Radiated, radio-frequency, electromagnetic field immunity test
GB/T 17626.3-2006 Electromagnetic compatibility—Testing and measurement techniques—Radiated, radio-frequency, electromagnetic field immunity test
GB/T 17626.3-2016 Electromagnetic compatibility—Testing and measurement techniques—Radiated,radio-frequency,electromagnetic field immunity test
GB/T 17626.3-2023 Electromagnetic compatibility—Testing and measurement techniques—Part 3:Radiated,radio-frequency,electromagnetic field immunity test
GB/T 17626.4-1998 Electromagnetic compatibility—Testing and measurement techniques—Electrical fast transient/burst immunity test
GB/T 17626.4-2008 Electromagnetic compatibility—Testing and measurement techniques—Electrical fast transient/burst immunity test
GB/T 17626.4-2018 Electromagnetic compatibility—Testing and measurement techniques—Electrical fast transient/burstimmunity test
GB/T 191-2025 Graphical symbols marking for handling and storage of packages
Related Standards
GB/T 2624-1993
Replaced
GB/T 2624-1993 Measurement of fluid flow by means of orifice plates, nozzles and Venturi tubes inserted in circular cross-section conduits running full
GB/T 17611-1998
Active
GB/T 17611-1998 Measurement of fluid flow in closed conduits—Vocabulary and symbols
GB/T 17612-1998
Active
GB/T 17612-1998 Measurement of liquid flow in closed conduits—Weighing method
GB/T 17613.1-1998
Active
GB/T 17613.1-1998 Measurement of liquid flow in closed conduits by weighing method—Procedures for checking installations Part 1:Static weighing systems
GB/T 18215.1-2000
Abolished