GB/T 22318.2-2008 Replaced National standards

GB/T 22318.2-2008 Surface acoustic wave(SAW)resonators—Part 1-2:Test conditions

GB/T 22318.2-2008 Surface acoustic wave(SAW)resonators—Part 1-2:Test conditions

Publish Date: 2008-08-06 Implement Date: 2009-01-01 For services related to genuine standard inquiry, procurement, translation, and other related services in China, please Contact Us

Basic Information

Standard Code: GB/T 22318.2-2008

Standard Type: National standards

Standard Status: Replaced

is_force_gb: no

CCS Name: Quartz crystals, piezoelectric components

ICS Name: \nFrequency control and selection using piezoelectric devices and dielectric devices

Publish Date: 2008-08-06

Implement Date: 2009-01-01

Pages: 14 pages

Scope

This part of GB/T 22318 applies to the test methods for surface acoustic wave (SAW) resonators (hereinafter referred to as SAW resonators). Chapters 4 to 6 of this part provide detailed test methods for the electrical performance of SAW resonators. Chapters 7 to 20 of this part provide test methods for maintaining the electrical performance of SAW resonators after a certain period of use. After completing the above-mentioned tests, the samples should meet the electrical performance requirements. Appendix A provides the prototype test plan and test methods and procedures. It can also be used to formulate the test plan for prototype models. When using this plan, the following issues should be considered: - Electrical performance requirements; - Test items and procedures; - Test severity; - To verify whether all samples have successfully passed the test, the content of the inspection needed during and/or after the test should be specified; - The number of samples used for the test and the allowable number of non-conforming products. After the prototype test, the SAW resonators should not be used on equipment or returned to the production department for other purposes.

Development Information

Word Count: 25 Thousand words Pages: 14 pages

Same series standard

GB/T 22318.1-2008 Surface acoustic wave (SAW) resonators—Part 1-1:General information and standard values

Superseded by the following standards

GB/T 22318.2-2023 Surface acoustic wave (SAW) resonators—Part 2:Guide to the use

Referenced Standards

GB/T 2421-1999 Environmental testing for electric and electronic products—Part 1:General and guidance GB/T 2423.1-2001 Environmental testing for electric and electronic products—Part 2:—Test methods Tests A:Cold GB/T 2423.2-2001 Environmental testing for electric and electronic products—Part 2:Test methods-Tests B:Dry heat GB/T 2423.3-2006 Environmental testing for electric and electronic products—Part 2:Testing method—Test Cab:Damp heat, steady state GB/T 2423.4-2008 Environmental testing for electric and electronic products—Part 2:Test method—Test Db:Damp heat,cyclic(12 h+12 h cycle) GB/T 2423.5-1995 Environmental testing for electric and electronic products—Part 2:Test methods—Test Ea and guidance:Shock GB/T 2423.6-1995 Environmental testing for electric and electronic products—Part 2:Test methods—Test Eb and guidance:Bump GB/T 2423.10-1995 Environmental testing for electric and electronic products—Part 2:Test methods—Test Fc and guidance:Vibration (Sinusoidal) GB/T 2423.15-1995 Environmental testing for electric and electronic products—Part 2:Test methods—Test Ga and guidance:Acceleration, steady state GB/T 2423.16-1999 Environmental testing for electric and electronic products—Part 2:Tests methods—Test J and guidance:Mould growth GB/T 2423.21-1991 Basic environmental testing procedures for electric and electronic products—Test M:Low air pressure GB/T 2423.22-2002 Environmental testing for electric and electronic products—Part 2:Test methods Test N:Change of temperature GB/T 2423.23-1995 Environmental testing for electric and electronic products Test Q:Sealing GB/T 2423.28-2005 Environmental testing for electric and electronic products—Part 2:Test methods—Test T:Soldering GB/T 2423.29-1999 Environmental testing for electric and electronic products—Part 2:Test methods—Test U:Robustness of terminations and integral mounting devices GB/T 22317.1-2008 Piezoelectric filters of assessed quality—Part 1:Generic specification GB/T 22318.1-2008 Surface acoustic wave (SAW) resonators—Part 1-1:General information and standard values IEC 60122 IEC 60444

Adopt standards

IEC 61019-1-2:1993

Related Standards

GB/T 6429-1986 Active

GB/T 6429-1986 The rule of type designation for quartz crystal units

Publish Date: 1986-05-27

GB/T 6430-1986 Active

GB/T 6430-1986 The rule of type designation for crystal holders (enclosures)

Publish Date: 1986-05-27

GB/T 6627-1986 Active

GB/T 6627-1986 Designations for lumbered synthetic quartz crystals

Publish Date: 1986-07-29

GB/T 11387-1989 Replaced

GB/T 11387-1989 Testing method for static flexural strength of piezoelectric ceramics

Publish Date: 1989-07-04

GB/T 12274-1990 Replaced

GB/T 12274-1990 Quartz crystal controlled oscillators—Generic specification for

Publish Date: 1990-02-09

GB/T 12275-1990 Active

GB/T 12275-1990 The rule of type designation for quartz crystal oscillators

Publish Date: 1990-02-09