GB 6450-1986
Replaced
GB/T 17468-2019
Active
National standards
GB/T 17468-2019 Guide for choice power transformers
GB/T 17468-2019 Guide for choice power transformers
Basic Information
Standard Code:
GB/T 17468-2019
Standard Type:
National standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Transformer
ICS Name:
Transformers, reactors, and inductors
Publish Date:
2019-12-10
Implement Date:
2020-07-01
Publisher:
国家市场监督管理总局、国家标准化管理委员会
Technical Committee:
全国变压器标准化技术委员会(SAC/TC 44)
Pages:
53 pages
Scope
本标准规定了选择和使用电力变压器的一般原则及有关要求。本标准适用于对电力规划设计时合理地选择和使用好电力变压器进行指导。用户选用变压器时,可参考本标准确定变压器的类型、技术参数、技术性能、检修策略和合同等内容。
Development Information
Drafting Units:
沈阳变压器研究院股份有限公司、中国电力科学研究院有限公司、明珠电气股份有限公司、特变电工沈阳变压器集团有限公司、西安西电变压器有限责任公司、保定天威保变电气股份有限公司、特变电工衡阳变压器有限公司、山东输变电设备有限公司、江苏华鹏变压器有限公司、国网吉林省电力有限公司电力科学研究院、特变电工股份有限公司新疆变压器厂、海鸿电气有限公司、南方电网科学研究院有限责任公司、广东电网有限责任公司电力科学研究院、广东科源电气有限公司、江苏华辰变压器股份有限公司、江西赣电电气有限公司、浙江江山变压器股份有限公司、卧龙电气烟台东源变压器有限公司、江西明正变电设备有限公司、鲁特电工股份有限公司等
Drafting Persons:
姜益民、张显忠、付超、蔡定国、车力、张良县、程从明、刘金波、王明胜、周国伟、赵春明、马旭平、孟杰、梁庆宁、雷园园、林春耀、邱国兴、徐健、张爱民、姜振军、孔非凡、吴锦新、张令建、李德志、周求宽
Replace the following standards
Referenced Standards
GB/T 25446-2010 Specification and technical requirements for oil-immersed amorphous alloy core distribution transformers
GB/T 32825-2016 Specification and technical requirements for three-phase dry-type tridimensional wound-core distribution transformers
GB/T 32825-2024 Technical parameters and requirements for three-phase dry-type tridimensional wound core power transformers
GB 50148-2010 Code for construction and acceptance of power transformers oil reactor and mutual inductor
GB 50150-2016 Electric equipment installation engineering - standard for hand-over test of electric equipment
DL/T 272-2012 The technical conditions for the use of 220kV to 750kV oil-immersed power transformers
DL/T 272-2022 The technical specifications for the use of 220kV to 750kV oil-immersed power transformers
DL/T 572-2021 DL/T 572-2021 Operating Regulations for Power Transformer
DL/T 572-2010 Electric power transformer operating regulations
DL/T 573-2010 Guidelines for maintenance of power transformers
DL/T 574-2010 Guidelines for Operation and Maintenance of Transformer Tap-changer Switchgear
DL/T 574-1995 Operating and Maintenance Guidelines for Switched-Mode Transformers with Switching Regulation (Confirmatory Meeting 2005)
DL/T 985-2012 Guidelines for Energy Efficiency and Technical and Economic Evaluation of Distribution Transformers
DL/T 985-2005 Guidelines for Energy Efficiency and Economic Technical Evaluation of Distribution Transformers
DL/T 985-2022 Guidelines for Energy Efficiency and Technical Economic Evaluation of Distribution Transformers
DL/T 1102-2009 The code of distribution transformer operation
DL/T 1102-2021
JB/T 501-2021 Electric power transformer test guidelines
JB/T 501-2006 Electric power transformer test guidelines
JB/T 501-1991 Electric power transformer test guidelines
JB/T 2426-2016 JBT 2426-2016 Technical specifications and requirements for three-phase transformers for self-use by power plants and substation
JB 2426-1992 JB 2426-1992 Technical specifications and requirements for three-phase transformers for self-use by power plants and substation
JB/T 2426-2004 Three-phase transformer for self-use by power plant and substation: Technical parameters and requirements
JB/T 3837-2016 JB/T 3837-2016 Transformer product standard model numbering method
JB/T 3837-1992 JB/T 3837-1992 Transformer product model designation method
JB/T 3837-2010 Transformer product model numbering method
JB/T 3837-1996 JBT 3837-1996 Modeling method for transformer products
JB/T 3837-2025
JB/T 5345-2016 Transformer butterfly valve
JB/T 5345-1991 Transformer butterfly valve
JB/T 5345-2005 Transformer butterfly valve
JB/T 5347-2013 Transformer-mounted planar radiator
JB/T 5347-1991 Transformer-mounted Flat-type Radiator
JB/T 5347-1999 Transformer-mounted sheet-type radiator
JB/T 6302-2016 Transformer oil surface temperature controller
JB/T 6302-2005 Transformer Oil Level Thermostat
JB/T 6302-1992 Transformer-mounted pressure-type thermometer
JB/T 6484-2016 Transformer oil reservoir
JB/T 6484-1992 Transformer oil reservoir
JB/T 6484-2005 Transformer oil tank
JB/T 7065-2015 Transformer pressure relief valve
JB 7065-1993 Transformer pressure relief valve
JB/T 7065-2004 Pressure relief devices for transformers
JB/T 7631-2016 Transformer electronic temperature controller
JB/T 7631-2005 Transformer electronic temperature controller
JB/T 7631-1994 Transformer-based Resistance Thermometer
JB/T 7633-2007 Transformer-use spiral plate strong oil-water cooler
JB/T 7633-1994 Transformer-use spiral plate strong oil-water cooler
JB/T 7633-2025 Transformer-use spiral plate strong oil-water cooler
JB/T 8315-2022 Forced oil-cooled air cooler for transformers
JB/T 8315-2007 Forced-oil and forced-air coolers for transformer
JB/T 8316-2007 Forced oil-cooled water cooler for transformers
JB/T 8316-2025 Transformer-based forced oil-cooled water cooler
JB/T 8317-2022 Transformer cooling oil flow relay
JB/T 8317-2007 The oil flow relay used for the cooling system of the transformer
JB/T 8318-2007 Transformer mold insulation parts technical specification
JB/T 8318-1996 Transformer insulation preform technology specification
JB/T 8318-2025 Transformer molding insulation parts technical specification
JB/T 8448.1-2018 Specification for Sealing Products for Transformers and Their Components - Part 1: Rubber Sealing Products
JB/T 8448.1-2004 Technical Specification for Sealing Products Used in Transformer-type Products Part 1: Rubber Sealing Products
JB/T 8450-2016 Transformer winding temperature controller
JB/T 8450-2005 Transformer winding temperature controller
JB/T 8971-2013 Dry-type transformer with cross-flow cooling fan
JB/T 8971-1999 Dry-type transformer cooling axial fan with circulating flow
JB/T 9642-2013 Transformer fan
JB/T 9642-1999 Transformer fan
JB/T 9647-2014 Transformer-operated gas-operated relay
JB/T 9647-1999 Gas relay
JB/T 10088-2016 JBT 10088-2016 6kV~1000kV-level power transformer sound level
JB/T 10088-2004
JB/T 10112-1999 Transformer Oil Pump
JB/T 10112-2013 Oil pumps for transformers
JB/T 10217-2013 Combination Transformer
JB/T 10217-2000 Combination Transformer
JB/T 10217-2025 Combination Transformer
JB/T 10317-2014 JBT 10317-2014 Single-phase oil-immersed distribution transformer technical specifications and requirements
JB/T 10317-2002 JBT 10317-2002 Single-phase oil-immersed distribution transformer technical specifications and requirements
JB/T 10428-2015 Transformer Multifunctional Protection Device
JB/T 10428-2004 Transformer multi-function protection device
JB/T 10430-2015 Rapid oil pressure relay for transformers
JB/T 10430-2004 Rapid oil pressure relay for transformers
JB/T 10544-2018 Subterranean Transformer
JB/T 10544-2006 Underground Transformer
JB/T 10549-2006 JBT 10549-2006 SF6 gas density relay and density meter General technical requirements
JB/T 10681-2006 Combustion oil-immersed load switch for composite transformer
JB/T 10692-2018 Transformer Oil Level Gauge
JB/T 10692-2007 Transformer Oil Level Gauge
JB/T 10778-2020 Three-phase oil-immersed adjustable capacity transformer
JB/T 10778-2007 Three-phase oil-immersed adjustable capacity transformer
NB/T 42066-2016 The technical specifications and requirements for 6kV to 35kV class dry aluminum-wound power transformers
NB/T 42067-2016 The technical specifications and requirements for 6kV to 36kV oil-immersed aluminum-wound distribution transformers
IEC 60076-15
Related Standards
GB/T 7449-1987
Replaced
GB/T 7449-1987 Guide to the lightning impulse and switching impulse testing of power transformers and reactors
GB 13028-1991
Abolished
GB 13028-1991 Isolating transformers and safety isolating transformers Requirements
GB/T 14006-1992
Active
GB/T 14006-1992 Outline dimensions of transformers and inductors for use in telecommunication and electronic equipment—Part 1:Transformers and inductors using YEI-1 laminations
GB/T 14860-1993
Replaced
GB/T 14860-1993 Generic specification for transformers and inductors for use in telecommunication and electronic equipment
GB/T 15164-1994
Replaced