GB 6450-1986
Replaced
GB/T 17468-2008
Replaced
National standards
GB/T 17468-2008 The guide for choice power transformers
GB/T 17468-2008 The guide for choice power transformers
Basic Information
Standard Code:
GB/T 17468-2008
Standard Type:
National standards
Standard Status:
Replaced
is_force_gb:
no
CCS Name:
Transformer
ICS Name:
Transformers, reactors, and inductors
Publish Date:
2008-09-24
Implement Date:
2009-08-01
Pages:
29 pages
Scope
This standard specifies the selection guidelines for power transformers used in power plants and substations, self-use transformers in power plants and substations, and distribution transformers. This standard is applicable to design departments when selecting transformers for power plants and substations. When users order transformers, they can refer to this guideline to determine the technical parameters of the transformers and the content of the contract.
Development Information
Replace the following standards
Superseded by the following standards
Referenced Standards
GB 311.1-1997 Insulation co-ordination for high voltage transmission and distribution equipment
GB/T 311.1-2012 Insulation co-ordination—Part 1:Definitions,principles and rules
GB/T 321-1980 Preferred numbers and preferred number series
GB/T 321-2005 Preferred numbers—Series of preferred numbers
GB 1094.1-1996 Power transformers—Part 1:General
GB/T 1094.1-2013 Power transformers—Part 1:General
GB 1094.2-1996 Power transformers—Part 2:Temperature rise
GB/T 1094.2-2013 Power transformers—Part 2:Temperature rise for liquid-immersed transformers
GB/T 1094.3-2003 Power transformers—Part 3:Insulation levels,dielectric tests and external clearances in air
GB/T 1094.3-2017 Power transformers—Part 3:Insulation levels,dielectric tests and external clearances in air
GB 1094.5-2003 Power transformers—Part 5:Ability to withstand short circuit
GB/T 1094.5-2008 Power transformers—Part 5:Ability to withstand short circuit
GB/T 1094.7-2008 Power transformers—Part 7:Loading guide for oil-immersed power transformers
GB/T 1094.7-2024 Power transformers—Part 7:Loading guide for mineral-oil-immersed power transformers
GB/T 1094.10-2003 Power transformers—Part10:Determination of sound levels
GB/T 1094.10-2022 Power transformers—Part 10:Determination of sound levels
GB/T 1094.11-2007 Power transformers—Part 11:Dry-type transformers
GB/T 1094.11-2022 Power transformers—Part 11:Dry-type transformers
GB 1208-1997 Current transformers
GB 1208-2006 Current transformers
GB 3096-1993 Standard of environmental noise of urban area
GB 3096-2008 Environmental quality standards for noise
GB/T 4109-1999 Technical specification of high voltage bushing
GB/T 4109-2008 Insulated bushings for alternating voltages above 1 000 V
GB/T 4109-2022 Insulated bushings for alternating voltages above 1 000 V
GB/T 6451-1999 Specification and technical requirements for three-phase oil-immersed power transformers
GB/T 6451-2008 Specification and technical requirements for oil-immersed power transformers
GB/T 6451-2015 Specification and technical requirements for oil-immersd power transformers
GB/T 6451-2023 Technical parameters and requirements for oil-immersed power transformers
GB/T 7595-2000 Quality criteria of transformer oils in service
GB/T 7595-2008 Quality of transformer oils in service
GB/T 7595-2017 Quality of transformer oils in service
GB/T 10228-1997 Specification and technical requirements for dry-type power transformers
GB/T 10228-2008 Specification and technical requirements for dry-type power transformers
GB/T 10228-2015 Specification and technical requirements for dry-type power transformers
GB/T 10228-2023 Technical parameters and requirements for dry-type power transformers
GB/T 10230.1-2007 Tap-changers—Part 1:Performance requirements and test methods
GB/T 10230.1-2019 Tap-changers—Part 1:Performance requirements and test methods
GB/T 10230.2-2007 Tap-changers—Part 2:Application guide
GB/T 10230.2-2025 Tap changers—Part 2:Application guidelines
GB 12348-1990 Standard of noise at boundary of industrial enterprises
GB/T 13499-2002 Power transformers—Application guide
GB 16847-1997 Requirements for protective current transformers for transient performance
GB/T 17211-1998 Loading guide for dry-type power transformers
GB 20052-2006 The minimum allowable values of energy efficiency and the evaluating values of energy conservation for three-phase distribution transformers
GB 20052-2013 Minimum allowable values of energy efficiency and energy efficiency grades for three-phase distribution transformers
GB 20052-2020 Minimum allowable values of energy efficiency and the energy efficiency grades for power transformers
GB 20052-2024 Minimum allowable values of energy efficiency and the energy efficiency grades for power transformers
GBJ 148
DL/T 985-2012 Guidelines for Energy Efficiency and Technical and Economic Evaluation of Distribution Transformers
DL/T 985-2005 Guidelines for Energy Efficiency and Economic Technical Evaluation of Distribution Transformers
DL/T 985-2022 Guidelines for Energy Efficiency and Technical Economic Evaluation of Distribution Transformers
JB/T 501-2021 Electric power transformer test guidelines
JB/T 501-2006 Electric power transformer test guidelines
JB/T 501-1991 Electric power transformer test guidelines
JB/T 2426-2016 JBT 2426-2016 Technical specifications and requirements for three-phase transformers for self-use by power plants and substation
JB 2426-1992 JB 2426-1992 Technical specifications and requirements for three-phase transformers for self-use by power plants and substation
JB/T 2426-2004 Three-phase transformer for self-use by power plant and substation: Technical parameters and requirements
JB/T 3837-2016 JB/T 3837-2016 Transformer product standard model numbering method
JB/T 3837-1992 JB/T 3837-1992 Transformer product model designation method
JB/T 3837-2010 Transformer product model numbering method
JB/T 3837-1996 JBT 3837-1996 Modeling method for transformer products
JB/T 3837-2025
JB/T 5345-2016 Transformer butterfly valve
JB/T 5345-1991 Transformer butterfly valve
JB/T 5345-2005 Transformer butterfly valve
JB/T 5347-2013 Transformer-mounted planar radiator
JB/T 5347-1991 Transformer-mounted Flat-type Radiator
JB/T 5347-1999 Transformer-mounted sheet-type radiator
JB/T 6302-2016 Transformer oil surface temperature controller
JB/T 6302-2005 Transformer Oil Level Thermostat
JB/T 6302-1992 Transformer-mounted pressure-type thermometer
JB/T 6484-2016 Transformer oil reservoir
JB/T 6484-1992 Transformer oil reservoir
JB/T 6484-2005 Transformer oil tank
JB/T 7065-2015 Transformer pressure relief valve
JB 7065-1993 Transformer pressure relief valve
JB/T 7065-2004 Pressure relief devices for transformers
JB/T 7631-2016 Transformer electronic temperature controller
JB/T 7631-2005 Transformer electronic temperature controller
JB/T 7631-1994 Transformer-based Resistance Thermometer
JB/T 7633-2007 Transformer-use spiral plate strong oil-water cooler
JB/T 7633-1994 Transformer-use spiral plate strong oil-water cooler
JB/T 7633-2025 Transformer-use spiral plate strong oil-water cooler
JB/T 8315-2022 Forced oil-cooled air cooler for transformers
JB/T 8315-2007 Forced-oil and forced-air coolers for transformer
JB/T 8316-2007 Forced oil-cooled water cooler for transformers
JB/T 8316-2025 Transformer-based forced oil-cooled water cooler
JB/T 8317-2022 Transformer cooling oil flow relay
JB/T 8317-2007 The oil flow relay used for the cooling system of the transformer
JB/T 8318-2007 Transformer mold insulation parts technical specification
JB/T 8318-1996 Transformer insulation preform technology specification
JB/T 8318-2025 Transformer molding insulation parts technical specification
JB/T 8448.1-2018 Specification for Sealing Products for Transformers and Their Components - Part 1: Rubber Sealing Products
JB/T 8448.1-2004 Technical Specification for Sealing Products Used in Transformer-type Products Part 1: Rubber Sealing Products
JB/T 8450-2016 Transformer winding temperature controller
JB/T 8450-2005 Transformer winding temperature controller
JB/T 8971-2013 Dry-type transformer with cross-flow cooling fan
JB/T 8971-1999 Dry-type transformer cooling axial fan with circulating flow
JB/T 9639-1999 Enclosing busbar
JB/T 9642-2013 Transformer fan
JB/T 9642-1999 Transformer fan
JB/T 9647-2014 Transformer-operated gas-operated relay
JB/T 9647-1999 Gas relay
JB/T 10088-2016 JBT 10088-2016 6kV~1000kV-level power transformer sound level
JB/T 10088-2004
JB/T 10112-1999 Transformer Oil Pump
JB/T 10112-2013 Oil pumps for transformers
JB/T 10317-2014 JBT 10317-2014 Single-phase oil-immersed distribution transformer technical specifications and requirements
JB/T 10317-2002 JBT 10317-2002 Single-phase oil-immersed distribution transformer technical specifications and requirements
JB/T 10318-2002 The technical parameters and requirements of an oil-immersed non-crystalline alloy iron core distribution transformer
JB/T 10428-2015 Transformer Multifunctional Protection Device
JB/T 10428-2004 Transformer multi-function protection device
JB/T 10430-2015 Rapid oil pressure relay for transformers
JB/T 10430-2004 Rapid oil pressure relay for transformers
JB/T 10692-2018 Transformer Oil Level Gauge
JB/T 10692-2007 Transformer Oil Level Gauge
ANSI/IEEE C57.13:1993
Related Standards
GB/T 7449-1987
Replaced
GB/T 7449-1987 Guide to the lightning impulse and switching impulse testing of power transformers and reactors
GB 13028-1991
Abolished
GB 13028-1991 Isolating transformers and safety isolating transformers Requirements
GB/T 14006-1992
Active
GB/T 14006-1992 Outline dimensions of transformers and inductors for use in telecommunication and electronic equipment—Part 1:Transformers and inductors using YEI-1 laminations
GB/T 14860-1993
Replaced
GB/T 14860-1993 Generic specification for transformers and inductors for use in telecommunication and electronic equipment
GB/T 15164-1994
Replaced