GB/T 2410-1980
Replaced
GB/T 33796-2017
Active
National standards
GB/T 33796-2017 General requirement of thermoplastic starch
GB/T 33796-2017 General requirement of thermoplastic starch
Basic Information
Standard Code:
GB/T 33796-2017
Standard Type:
National standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Daily-use plastic products
ICS Name:
Plastic
Publish Date:
2017-05-31
Implement Date:
2017-12-01
Pages:
7 pages
Scope
This standard specifies the terms and definitions, marking, technical requirements, test methods, inspection rules, and marking, packaging, transportation, and storage of thermoplastic starch. This standard applies to thermoplastic starch made from various natural starches as the main raw materials, which is processed through physical modification or/and chemical modification and used in the production of plastic materials and products.
Development Information
Superseded by the following standards
Referenced Standards
GB/T 1033.1-2008 Plastics—Methods for determining the density of non-cellular plastics—Part 1:Immersion method,liquid pyknometer method and titration method
GB/T 2547-2008 Plastic resins—Sampling
GB/T 3682-2000 Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics
GB/T 6284-2006 Chemical products for industrial use—General method for determination of water content—The loss of mass on drying method
GB/T 20197-2006 Define, classify, marking and degradability requirement of degradable plastic
ISO 15985:2004
GB/T 19276.1-2003 Determination of the ultimate aerobic biodegradability of plastic materials in an aqueous medium—Method by measuring the oxygen demand in a closed respirometer
GB/T 19276.2-2003 Determination of the ultimate aerobic biodegradability of plastic materials in an aqueous medium—Method by analysis of evolved carbon dioxide
GB/T 19277.1-2011 Determination of the ultimate aerobic biodegradability of plastic materials under conctrolled composting conditions—Method by analysis of evolved cabon dioxide—Part 1:General method
GB/T 22047-2008 Plastics—Determination of the ultimate aerobic biodegradability in soil by measuring the oxygen demand in a respirometer or the amount of carbon dioxide evolved
GB/T 32106-2015 Plastics—Determination of the ultimate anaerobic biodegradation of plastic materials in an aqueous system—Method by measurement of biogas production
QB/T 2957-2008 Determination of Starch Content in Starch-based Plastics Using Thermal Gravimetric Analysis (TG)
SH/T 1541-2006 Hot-melt plastic particle appearance test methods
QB/T 4012-2010 Starch-based plastics
GB/T 19277.1-2025 Determination of the ultimate aerobic biodegradability of plastic materials under conctrolled composting conditions—Method by analysis of evolved cabon dioxide—Part 1:General method
GB/T 19276.2-2026 Determination of the ultimate aerobic biodegradability of plastic materials in an aqueous medium—Part 2:Method by analysis of evolved carbon dioxide
GB/T 19276.1-2026 Determination of the ultimate aerobic biodegradability of plastic materials in an aqueous medium—Part 1:Method by measuring the oxygen demand in a closed respirometer
Related Standards
GB/T 2411-1980
Replaced
GB/T 2411-1980 Plastics—Shore hardness test
GB/T 2412-1980
Replaced
GB/T 2412-1980 Polypropylene—Method of determination of normal indices
GB/T 2547-1981
Replaced
GB/T 2547-1981 Plastic resins—Sampling
GB/T 2895-1982
Replaced
GB/T 2895-1982 Determination for acid value of unsaturated polyester resins
GB/T 2913-1982
Active