GB/T 18801-2002
Replaced
T/SAEPI 011-2022
Active
Group standards
T/SAEPI 011-2022 Air filter for air purifiers
T/SAEPI 011-2022 Air filter for air purifiers
Price:
$ 20.00
Basic Information
Standard Code:
T/SAEPI 011-2022
Standard Type:
Group standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Light industry, culture, and daily necessities
ICS Name:
Floor treatment equipment
Publish Date:
2022-11-01
Implement Date:
2022-12-01
Scope
Scope: This document specifies the terms and definitions, classification and marking, requirements, test methods, inspection rules, marking, packaging, transportation, and storage of particulate filters for air purifiers. This document applies to physical filtration particulate filters for air purifiers. This document does not apply to electrostatic precipitators. Main technical content: This document specifies the terms and definitions, classification and marking, requirements, test methods, inspection rules, marking, packaging, transportation, and storage of particulate filters for air purifiers. 5.1 Appearance 5.1.1 The surface of the filter shall be smooth and free from scratches, indentations, and damage. 5.1.2 The filter media, sealing pads, and frames or support structures shall have sufficient strength to meet the requirements, and shall not exhibit loosening or deformation. 5.2 Dimensional Tolerances 5.2.1 For filters with an edge length greater than 500mm, the dimensional tolerance of the end face shall be (0, -3.2)mm; for filters with an edge length not exceeding 500mm, the dimensional tolerance of the end face shall be (0, -1.6)mm. 5.2.2 The dimensional tolerance of the filter depth shall be (+1.6,0)mm. 5.2.3 When the diagonal length of the filter is greater than 700mm, the deviation between the two diagonals of each end face shall not exceed 4.5mm; when the diagonal length of the filter is not greater than 700mm, the deviation shall not exceed 2.3mm. 5.2.4 The flatness of the end face and side face of the filter shall not exceed 1.6mm. 5.3 Efficiency and Initial Resistance In the initial state, the PM1.0 counting efficiency and initial resistance of the particulate filter shall comply with the provisions of Table 1. 5.4 Cumulative Cleaning Capacity (CCM) The cumulative cleaning capacity (CCM) of the filter for particulate matter shall comply with the provisions of Table 2. 5.5 Compatibility with the Air Purifier If the
Development Information
Related Standards
GB 4706.57-2002
Replaced
GB 4706.57-2002 Safety of household and similar electrical appliances—Particular requirements for floor treatment machines and wet scrubbing machines
GB 4706.7-2004
Replaced
GB 4706.7-2004 Household and similar electrical appliances—Safety—Particular requirements for vacuum cleaner and water suction appliances
GB/T 20291-2006
Replaced
GB/T 20291-2006 Vacuum cleaners for household use—Methods for measuring the performance
GB 4706.74-2008
Replaced
GB 4706.74-2008 Household and similar electrical appliances—Safety—Particular requirements for sewing machines
GB 4706.57-2008
Replaced