GB/T 1814-1979
Active
GB/T 8358-2014
Replaced
National standards
GB/T 8358-2014 Steel wire ropes—Determination of measured breaking force
GB/T 8358-2014 Steel wire ropes—Determination of measured breaking force
Basic Information
Standard Code:
GB/T 8358-2014
Standard Type:
National standards
Standard Status:
Replaced
is_force_gb:
no
CCS Name:
\n Test methods for the mechanical properties of metals
ICS Name:
Mechanical testing of metal materials
Publish Date:
2014-06-09
Implement Date:
2015-01-01
Pages:
6 pages
Scope
This standard specifies the terms and definitions, test principles, sample preparation, test equipment, test procedures, and test reports for determining the actual breaking tensile strength of steel wire ropes.
This standard is applicable to the determination of the actual breaking tensile strength of various steel wire rope products. The alloy casting method is suitable for steel wire ropes with a diameter greater than or equal to 6 mm or steel wire ropes with a wire diameter greater than or equal to 0.5 mm; the resin casting method and the sleeve pressing method are suitable for all types of steel wire ropes; the direct clamping method is suitable for single-strand steel wire ropes and other types of steel wire ropes; and the winding method is suitable for steel wire ropes with a diameter not exceeding 20 mm.
Development Information
Replace the following standards
Superseded by the following standards
Referenced Standards
GB/T 8706-1988 Steel wire ropes—Terminology
GB/T 8706-2006 Steel wire ropes—Vocabulary, designation and classification
GB/T 8706-2017 Steel wire ropes—Vocabulary,designation and classification
GB/T 16825.1-2002 Verification of static uniaxial testing machines—Part 1:Tension/compression testing machines—Verification and calibration of the force-measuring system
GB/T 16825.1-2008 Verification of static uniaxial testing machines—Part 1:Tension/compression testing machines—Verification and calibration of the force-measuring system
GB/T 16825.1-2022 Metallic materials—Calibration and verification of static uniaxial testing machines—Part 1:Tension/compression testing machines—Calibration and verification of the force-measuring system
Adopt standards
ISO 3108:1974
Related Standards
GB/T 2107-1980
Replaced
GB/T 2107-1980 Metal material—Twisting fatigue test
GB/T 3075-1982
Replaced
GB/T 3075-1982 Method of axial force controlled fatigue testing of metals
GB/T 3373-1982
Replaced
GB/T 3373-1982 Rims for tractors, agricultural and forestry machines
GB/T 3771-1983
Active
GB/T 3771-1983 Conversion of hardness and strength for copper alloys
GB/T 4105-1983
abolished_transferred