GB/T 1525-1979
Replaced
GB/T 2676-2006
Active
National standards
GB/T 2676-2006 Chart paper
GB/T 2676-2006 Chart paper
Basic Information
Standard Code:
GB/T 2676-2006
Standard Type:
National standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Paper
ICS Name:
Paper and cardboard
Publish Date:
2006-03-10
Implement Date:
2006-10-01
Pages:
5 pages
Scope
This standard specifies the requirements for nautical chart paper, testing methods, sampling, marking, packaging, transportation, storage, etc. This standard applies to offset multicolor nautical chart paper.
Development Information
Replace the following standards
Referenced Standards
GB/T 8940.1
GB/T 450-2002 Paper and board—Sampling for testing
GB/T 450-2008 Paper and board—Sampling for testing and identification of machine and cross direction,wire side and felt side
GB/T 451.1-2002 Paper and board—Determination of size and deviation
GB/T 451.2-2002 Paper and board—Determination of grammage
GB/T 451.2-2023 Paper and board—Part 2:Determination of grammage
GB/T 451.3-2002 Paper and board—Determination of thickness
GB/T 453-2002 Paper and board—Determination of tensile properties(Constant rate of loading methods)
GB/T 456-2002 Paper and board—Determination of smoothness (Bekk method)
GB/T 457-2002 Paper—Determination of folding endurance (Schopper method)
GB/T 457-2008 Paper and board—Determination of folding endurance
GB/T 459-2002 Paper and board—Determination of demensional instability
GB/T 460-2002 Paper—Determination of the sizing value(Ink line method)
GB/T 460-2008 Paper—Determination of the sizing value
GB/T 462-2003 Paper and board—Determination of moisture content
GB/T 462-2008 Paper,board and pulp—Determination of moisture content of analytical sample
GB/T 462-2023 Paper, board and pulps—Determination of moisture content of analytical sample
GB/T 465.2-2008 Paper and board—Determination of tensile strength after immersion in water
GB/T 1541-2007 Paper and board—Determination of dirt
GB/T 1541-2013 Paper and board—Determination of dirt
GB/T 2828.1-2003 Sampling procedures for inspection by attributes—Part 1:Sampling schemes indexed by acceptance quality limit(AQL) for lot-by-lot inspection
GB/T 2828.1-2012 Sampling procedures for inspection by attributes—Part 1:Sampling schemes indexed by acceptance quality limit(AQL) for lot-by-lot inspection
GB/T 7974-2002 Paper, board and pulp-Measurement of brightness—Diff/Geometry
GB/T 7974-2013 Paper,board and pulps—Measurement of diffuse blue reflectance factor—D65 brightness(Diff/ Geometry,Outdoor daylight conditions)
GB/T 10342-2002 Paper—Package and mark
GB/T 10739-2002 Paper, board and pulps—Standard atmosphere for conditioning and testing
GB/T 10739-2023 Paper,board and pulps—Standard atmosphere for conditioning and testing
GB/T 12914-1991 Paper and board—Determination of tensile properties—Constant rate of elongation method
GB/T 12914-2008 Paper and board—Determination of tensile properties
GB/T 12914-2018 Paper and board—Determination of tensile properties—Constant rate of elongation method(20 mm/min)
Related Standards
GB/T 2675-1981
Replaced
GB/T 2675-1981 Paper for drawing land maps
GB/T 2676-1981
Replaced
GB/T 2676-1981 Paper for drawing ocean maps
GB/T 4687-1984
Replaced
GB/T 4687-1984 Paper, board, pulp terms (Ⅰ)
GB/T 4873-1985
Active
GB/T 4873-1985 Continuous forms used for information processing—Sizes and feed holes
GB/T 5034-1985
Replaced