GB/T 2317.4-2008 Replaced National standards

GB/T 2317.4-2008 Test method for electric power fittings—Part 4:Acceptance inspection for electric power fittings

GB/T 2317.4-2008 Test method for electric power fittings—Part 4:Acceptance inspection for electric power fittings

Publish Date: 2008-12-30 Implement Date: 2009-10-01 For services related to genuine standard inquiry, procurement, translation, and other related services in China, please Contact Us

Basic Information

Standard Code: GB/T 2317.4-2008

Standard Type: National standards

Standard Status: Replaced

is_force_gb: no

CCS Name: Automation devices for power station equipment

ICS Name: \nTransmission lines and distribution lines

Publish Date: 2008-12-30

Implement Date: 2009-10-01

Pages: 5 pages

Scope

This part specifies the acceptance rules for electrical fittings.
This part applies to electrical fittings (hereinafter referred to as fittings) used in overhead power lines with a rated voltage of 10 kV and above, substations, and power plant distribution devices.
Similar fittings used in low-voltage distribution networks can refer to this part for use. For fittings used in conditions such as severe corrosion, pollution, high altitude areas, and high-cold regions, they shall also meet the relevant provisions of other standards.

Development Information

Word Count: 7 Thousand words Pages: 5 pages

Same series standard

GB/T 2317.1-2008 Test method for electric power fittings Part 1:Mechanical tests GB/T 2317.2-2008 Test method for electric power fittings—Part 2:Corona and RIV tests for electric power fittings GB/T 2317.3-2008 Test method for electric power fittings—Part 3:Heat cycle tests for electric power fittings

Replace the following standards

GB/T 2317.4-2000 Acceptance inspection,marking and packing for electric power fittings

Superseded by the following standards

GB/T 2317.4-2023 Test method for electric power fittings—Part 4:Acceptance inspection

Referenced Standards

GB 2314-1997 General technical requirements for electric power fittings GB/T 2314-2008 General technical requirements for electric power fittings GB/T 2317.1-2000 Mechanical tests for electric power fittings GB/T 2317.1-2008 Test method for electric power fittings Part 1:Mechanical tests GB/T 2317.2-2000 Corona and RIV tests for electric power fittings GB/T 2317.2-2008 Test method for electric power fittings—Part 2:Corona and RIV tests for electric power fittings GB/T 2317.3-2000 Heat cycle tests for electric power fittings GB/T 2317.3-2008 Test method for electric power fittings—Part 3:Heat cycle tests for electric power fittings DL/T 756-2009 DL/T 756-2009 Hanger clip。 DL/T 756-2023 Hanger clip DL/T 768.7-2012 Electricity fittings manufacturing quality of steel parts hot-dip zinc coating DL/T 1098-2016 DL/T 1098-2016 Interspace rod technical specification and test methods DL/T 1099-2009 DL/T 1099-2009 Anti-vibration hammer technical specifications and testing methods DL/T 756-2001 DL/T 756-2001 Hanging wire clamp DL/T 768.7-2002 Electricity fittings manufacturing quality and hot-dip galvanized layer of steel parts DL/T 1098-2009 DL/T 1098-2009 Interspacing Strips Technical Conditions and Test Methods

Related Standards

GB 15632-1995 Replaced

GB 15632-1995 General specifications for live-line lifting device

Publish Date: 1995-07-25

GB/T 2900.51-1998 Active

GB/T 2900.51-1998 Electrotechnical Overhead lines

Publish Date: 1998-08-13

GB/T 2340-1998 Abolished

GB/T 2340-1998 T-connector

Publish Date: 1998-12-14

GB/T 2341-1998 Abolished

GB/T 2341-1998 Terminal clamp

Publish Date: 1998-12-14

GB/T 18037-2000 Replaced

GB/T 18037-2000 Technical requirements and design guide for live working tools

Publish Date: 2000-04-03

GB/T 2315-2000 Replaced

GB/T 2315-2000 Nominal failing load series and coupling dimensions for electric power fittings

Publish Date: 2000-07-14