GB/T 19812.1-2017 Active National standards

GB/T 19812.1-2017 Plastic equipment for water saving irrigation—Part 1:Drip tape with labyrinth on one side

Publish Date: 2017-11-01 Implement Date: 2018-05-01 For services related to genuine standard inquiry, procurement, translation, and other related services in China, please Contact Us

Basic Information

Standard Code: GB/T 19812.1-2017

Standard Type: National standards

Standard Status: Active

is_force_gb: no

CCS Name: Plastic profiles

ICS Name: Plastic pipe

Publish Date: 2017-11-01

Implement Date: 2018-05-01

Pages: 15 pages

Scope

This part of GB/T 19812 specifies the terms and definitions, marking, materials, requirements, samples and test conditions, test methods, inspection rules, packaging marks, packaging, transportation, and storage of single-wing labyrinth drip irrigation tapes. This part applies to non-reusable drip irrigation tapes (hereinafter referred to as "drip irrigation tapes") made of polyolefins as the main raw material, extruded and blow-molded, with water-drop holes on one side and labyrinth-shaped flow channels. The temperature of the transport medium shall not exceed 45 °C.

Development Information

Word Count: 28 Thousand words Pages: 15 pages

Same series standard

GB/T 19812.2-2017 Plastic equipment for water saving irrigation—Part 2:Pressure compensating emitter and emitting pipe GB/T 19812.3-2017 Plastic equipment for water saving irrigation—Part 3:Drip pipe and drip tape inlaid with emitters inside

Replace the following standards

GB/T 19812.1-2005 Plastic equipment for water saving irrigation—Drip tape with labyrinth on one side

Referenced Standards

GB/T 2828.1-2012 Sampling procedures for inspection by attributes—Part 1:Sampling schemes indexed by acceptance quality limit(AQL) for lot-by-lot inspection GB/T 2918-1998 Plastics—Standard atmospheres for conditioning and testing GB/T 13021-1991 Determination for the carbon black content of polyethylene pipes and fittings by calcination and pyrolysis GB/T 17187-2009 Agricultural irrigation equipment—Emitters and emitting pipe—Specification and test methods GB/T 18251-2000 Method for the assessment of pigment or carbon black dispersion in polyolefin pipes,fittings and compounds GB/T 19278-2003 General terms and their definitions of thermoplastic pipes, fittings and valves GB/T 19466.6-2009 Plastics—Differential scanning calorimetry(DSC)—Part 6:Determination of oxidation induction time(isothermal OIT)and oxidation induction temperature(dynamic OIT) SL 571-2013 Testing methods for hydraulic parameters of water-saving irrigation equipment

Related Standards

GB/T 7155.1-1987 Abolished

GB/T 7155.1-1987 Determination of density of thermoplastic pipes and fittings—Part 1:Determination of reference density of polyethylene pipes and fittings

Publish Date: 1987-01-02

GB/T 7155.2-1987 Abolished

GB/T 7155.2-1987 Determination of density of thermoplastic pipes and fittings—Part 2:Determination of density of polypropylene pipes and fittings

Publish Date: 1987-01-02

GB/T 13018-1991 Abolished

GB/T 13018-1991 Polyethylene (PE) pipes—Tolerances on outside diameters and wall thicknesses

Publish Date: 1991-07-03

GB/T 13019-1991 Abolished

GB/T 13019-1991 Polypropylene (PP) pipes—Tolerances on outside diameters and wall thicknesses

Publish Date: 1991-07-03

GB/T 13020-1991 Abolished

GB/T 13020-1991 Unplasticized polyvinyl chloride (PVC-U) pipes—Tolerances on outside diameters and wall thicknesses

Publish Date: 1991-07-03

GB/T 13526-1992 Replaced

GB/T 13526-1992 Unplasticized polyvinyl chloride (PVC-U) pipes—Dichloromethane test

Publish Date: 1992-06-12