GB/T 18244-2000
Replaced
GB 18967-2009
Active
National standards
force_standard
GB 18967-2009 Modified bituminous waterproof sheet using polyethylene reinforcement
GB 18967-2009 Modified bituminous waterproof sheet using polyethylene reinforcement
Basic Information
Standard Code:
GB 18967-2009
Standard Type:
National standards
Standard Status:
Active
is_force_gb:
yes
CCS Name:
Roofing and paving waterproofing and moistureproof materials
ICS Name:
Waterproof
Publish Date:
2009-03-28
Implement Date:
2010-03-01
Pages:
10 pages
Scope
This standard specifies the terms and definitions, classification and marking, requirements, test methods, inspection rules, marking, packaging, transportation, and storage of modified asphalt polyethylene waterproofing membranes.
This standard applies to waterproofing membranes made of high-density polyethylene film as the base, with modified asphalt or self-adhesive asphalt on both sides, and a surface covered with isolation materials.
Development Information
Replace the following standards
Referenced Standards
GB/T 328.2-2007 Test methods for building sheets for waterproofing—Part 2:Bitumen sheets for waterproofing-visible defects
GB/T 328.4-2007 Test methods for building sheets for waterproofing—Part 4:Bitumen sheets for waterproofing-thickness and mass per unit area
GB/T 328.5-2007 Test methods for building sheets for waterproofing—Part 5:Plastic and rubber sheets for waterproofing-thickness and mass per unit area
GB/T 328.6-2007 Test methods for building sheets for waterproofing—Part 6:Bitumen sheets for waterproofing-length, width and straightness
GB/T 328.8-2007 Test methods for building sheets for waterproofing—Part 8:Bitumen sheets for waterproofing-tensile properties
GB/T 328.10-2007 Test methods for building sheets for waterproofing—Part 10:Bitumen,plastic and rubber sheets for waterproofing-watertightness
GB/T 328.11-2007 Test methods for building sheets for waterproofing—Part 11:Bitumen sheets for waterproofing-flow resistance at elevated temperature
GB/T 328.13-2007 Test methods for building sheets for waterproofing—Part 13:Plastic and rubber sheets for waterproofing-dimensional stability
GB/T 328.14-2007 Test methods for building sheets for waterproofing—Part 14:Bitumen sheets for waterproofing-flexibility at low temperature
GB/T 328.20-2007 Test methods for building sheets for waterproofing—Part 20:Bitumen sheets for waterproofing-resistance to peeling of joints
GB/T 18244-2000 Test methods for resistance to weathering of building water proofing materials
JC/T 1075-2008
Adopt standards
UNE 104-242-1989(1990)
Related Standards
GB/T 19889.7-2005
Replaced
GB/T 19889.7-2005 Acoustics—Measurement of sound insulation in buildings and of building elements—Part 7:Field measurements of impact sound insulation of floors
GB/T 19889.1-2005
Active
GB/T 19889.1-2005 Acoustics—Measurement of sound insulation in buildings and of building elements—Part 1:Requirements for laboratory test facilities with suppressed flanking transmission
GB/T 19889.2-2005
Abolished
GB/T 19889.2-2005 Acoustics—Measurement of sound insulation in buildings and of building elements—Part 2:Determination,verification and application of precision data
GB/T 19889.3-2005
Replaced
GB/T 19889.3-2005 Acoustics—Measurement of sound insulation in buildings and of building elements—Part 3:Laboratory measurements of airborne sound insulation of building elements
GB/T 19889.4-2005
Active