GB/T 18244-2000
Replaced
GB/T 23457-2009
Replaced
National standards
GB/T 23457-2009 Pre-applied and wet installed waterproof sheets
GB/T 23457-2009 Pre-applied and wet installed waterproof sheets
Basic Information
Standard Code:
GB/T 23457-2009
Standard Type:
National standards
Standard Status:
Replaced
is_force_gb:
no
CCS Name:
Roofing and paving waterproofing and moistureproof materials
ICS Name:
Waterproof
Publish Date:
2009-03-28
Implement Date:
2010-01-01
Pages:
14 pages
Scope
This standard specifies the classification, requirements, test methods, inspection rules, packaging, marking, storage, and transportation of pre-laid/wet-laid waterproofing membranes.
This standard applies to waterproofing membranes that are bonded with post-cast concrete or cement mortar mixtures.
Development Information
Superseded by the following standards
Referenced Standards
GB/T 328.2-2007 Test methods for building sheets for waterproofing—Part 2:Bitumen sheets for waterproofing-visible defects
GB/T 328.5-2007 Test methods for building sheets for waterproofing—Part 5:Plastic and rubber sheets for waterproofing-thickness and mass per unit area
GB/T 328.8-2007 Test methods for building sheets for waterproofing—Part 8:Bitumen sheets for waterproofing-tensile properties
GB/T 328.9-2007 Test methods for building sheets for waterproofing—Part 9:Plastic and rubber sheets for waterproofing-tensile properties
GB/T 328.10-2007 Test methods for building sheets for waterproofing—Part 10:Bitumen,plastic and rubber sheets for waterproofing-watertightness
GB/T 328.11-2007 Test methods for building sheets for waterproofing—Part 11:Bitumen sheets for waterproofing-flow resistance at elevated temperature
GB/T 328.14-2007 Test methods for building sheets for waterproofing—Part 14:Bitumen sheets for waterproofing-flexibility at low temperature
GB/T 328.15-2007 Test methods for building sheets for waterproof—Part 15:Plastic and rubber sheets for waterproof-foldability at low temperature
GB/T 328.18-2007 Test methods for building sheets for waterproofing—Part 18:Bitumen sheets for waterproofing-resistance to tearing(nail shank)
GB/T 328.20-2007 Test methods for building sheets for waterproofing—Part 20:Bitumen sheets for waterproofing-resistance to peeling of joints
GB/T 328.24-2007 Test methods for building sheets for waterproofing—Part 24:Bitumen,plastic and rubber sheets for waterproofing-resistance to impact
GB/T 328.25-2007 Test methods for building sheets for waterproofing—Part 25:Bitumen,plastic and rubber sheets for waterproofing-resistance to static loading
GB/T 328.26-2007 Test methods for building sheets for waterproofing—Part 26:Bitumen sheets for waterproofing-dissoulble composite of membrane(impregnated and coated asphalt amount)
GB/T 529-2008 Rubber,vulcanized or thermoplastic—Determination of tear strength(Trouser,angle and crescent test pieces)
GB/T 16777-2008 Test methods for building waterproofing coatings
Related Standards
GB/T 19889.7-2005
Replaced
GB/T 19889.7-2005 Acoustics—Measurement of sound insulation in buildings and of building elements—Part 7:Field measurements of impact sound insulation of floors
GB/T 19889.1-2005
Active
GB/T 19889.1-2005 Acoustics—Measurement of sound insulation in buildings and of building elements—Part 1:Requirements for laboratory test facilities with suppressed flanking transmission
GB/T 19889.2-2005
Abolished
GB/T 19889.2-2005 Acoustics—Measurement of sound insulation in buildings and of building elements—Part 2:Determination,verification and application of precision data
GB/T 19889.3-2005
Replaced
GB/T 19889.3-2005 Acoustics—Measurement of sound insulation in buildings and of building elements—Part 3:Laboratory measurements of airborne sound insulation of building elements
GB/T 19889.4-2005
Active