GB/T 13931-2002
Replaced
GB/T 43359-2023
Active
National standards
GB/T 43359-2023 Integrated equipment based on membrane technologies for treating dyeing and finishing wastewater
GB/T 43359-2023 Integrated equipment based on membrane technologies for treating dyeing and finishing wastewater
Basic Information
Standard Code:
GB/T 43359-2023
Standard Type:
National standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Environmental protection equipment
ICS Name:
Waste disposal and treatment equipment and devices
Publish Date:
2023-11-27
Implement Date:
2024-06-01
Pages:
16 pages
Scope
This document specifies the composition, technical requirements, test methods, inspection rules, marking, labeling, and accompanying documents, as well as the packaging, transportation, and storage of integrated membrane equipment for printing and dyeing wastewater (hereinafter referred to as "integrated equipment"). This document is applicable to the production, scientific research, testing, and use of integrated membrane equipment for reusing treated wastewater and brine after physical and biological treatment in the printing and dyeing industry.
Development Information
Referenced Standards
GB/T 25279-2022 Hollow fiber flat-plat membrane module
GB/T 43089-2023 Electrodialysis device for high-salinity-water concentration
SL 83
GB/T 191-2000 Packaging—Pictorial marking for handling of goods
GB/T 191-2008 Packaging—Pictorial marking for handling of goods
GB/T 6461-2002 Methods for corrosion testing of metallic and other inorganic coatings on metallic substrates—Rating of test specimens and manufactured articles subjected to corrosion tests
GB/T 7477-1987 Water quality—Determination of the sum of calcium and magnesium—EDTA titrimetric method
GB/T 11903-1989 Water quality—Determination of colority
GB/T 13195-1991 Water quality—Determination of water temperature—Thermometer or reversing thermometer method
GB/T 13200-1991 Water quality—Determination of turbidity
GB 13955-1992 Installation and operation of residual current operated protective devices
GB/T 13955-2005 Installation and operation of residual current operated protective devices
GB/T 13955-2017 Installation and operation of residual current operated protective devices
GB/T 18593-2001 Anti-corrosive painting of fusion bonded epoxy coating powders
GB/T 18593-2010 Anti-corrosive painting of fusion bonded epoxy coating powders
DL/T 588-2015 The determination of water quality pollution index
HJ 828-2017 Water quality: Determination of Chemical Oxygen Demand using Dichromate Method
HJ 1147-2020 Water quality pH measurement using electrode method
DL/T 588-1996 The determination of fouling index of water
HJ/T 51-1999 Water quality—Determination of total salt—Gravimetric method
HG/T 20700-2014 Engineering design code for programmable logic controller
GB/T 191-2025 Graphical symbols marking for handling and storage of packages
Related Standards
GB/T 19054-2003
Replaced
GB/T 19054-2003 General technical conditions for fuel oil cremator
GB/T 19229.1-2008
Active
GB/T 19229.1-2008 Coal-fired flue gas desulphurization equipment—Part 1:Coal-fired flue gas wet desulphurization equipment
GB/T 21508-2008
Replaced
GB/T 21508-2008 Performance test method for coal-fired flue gas desulphurization equipment
GB/T 21509-2008
Active
GB/T 21509-2008 Denitration equipment of coal-fired flue gas
GB/T 16845-2008
Replaced