GB/T 12555-2006 Active National standards

GB/T 12555-2006 Injection mould bases for plastics

GB/T 12555-2006 Injection mould bases for plastics

Publish Date: 2006-12-08 Implement Date: 2007-04-01 For services related to genuine standard inquiry, procurement, translation, and other related services in China, please Contact Us

Basic Information

Standard Code: GB/T 12555-2006

Standard Type: National standards

Standard Status: Active

is_force_gb: no

CCS Name: Mold

ICS Name: Molding equipment and casting equipment

Publish Date: 2006-12-08

Implement Date: 2007-04-01

Pages: 26 pages

Scope

This standard specifies the assembly type, dimensions, and markings of plastic injection mold frames. This standard applies to plastic injection mold frames.

Development Information

Word Count: 47 Thousand words Pages: 26 pages

Replace the following standards

GB/T 12555.1-1990 Injection mould for plastic large-size mould bases—Standard mould bases GB/T 12556.1-1990 Injection mould for plastic—Medium size and small size mould bases

Referenced Standards

GB/T 4169.1-2006 Components of injection moulds for plastics—Part 1:Ejector pin GB/T 4169.2-2006 Components of injection moulds for plastics—Part 2:Straight guide bush GB/T 4169.3-2006 Components of injection moulds for plastics—Part 3:Headed guide bush GB/T 4169.4-2006 Components of injection moulds for plastics—Part 4:Headed guide pillar GB/T 4169.5-2006 Components of injection moulds for plastics—Part 5:Shouldered guide pillar GB/T 4169.6-2006 Components of injection moulds for plastics—Part 6:Spacer block GB/T 4169.7-2006 Components of injection moulds for plastics—Part 7:Ejector plate GB/T 4169.8-2006 Components of injection moulds for plastics—Part 8:Mould plate GB/T 4169.9-2006 Components of injection moulds for plastics—Part 9:Stop pin GB/T 4169.10-2006 Components of injection moulds for plastics—Part 10:Support pillar GB/T 4169.11-2006 Components of injection moulds for plastics—Part 11:Round locating element GB/T 4169.12-2006 Components of injection moulds for plastics—Part 12:Ejector guide bush GB/T 4169.13-2006 Components of injection moulds for plastics—Part 13:Return pin GB/T 4169.14-2006 Components of injection moulds for plastics—Part 14:Ejector guide pillar GB/T 4169.15-2006 Components of injection moulds for plastics—Part 15:Flat ejector pin GB/T 4169.16-2006 Components of injection moulds for plastics—Part 16:Shouldered ejector pin GB/T 4169.17-2006 Components of injection moulds for plastics—Part 17:Ejector sleeve GB/T 4169.18-2006 Components of injection moulds for plastics—Part 18:Locating ring GB/T 4169.19-2006 Components of injection moulds for plastics—Part 19:Sprue bush GB/T 4169.20-2006 Components of injection moulds for plastics—Part 20:Limit pin GB/T 4169.21-2006 Components of injection moulds for plastics—Part 21:Rectangular locating element GB/T 4169.22-2006 Components of injection moulds for plastics—Part 22:Round mould opening delayer GB/T 4169.23-2006 Components of injection moulds for plastics—Part 23:Rectangular mould opening delayer

Related Standards

GB/T 4170-1984 Replaced

GB/T 4170-1984 Components of injection mould for plastics—Specification

Publish Date: 1984-02-27

GB/T 8845-1988 Replaced

GB/T 8845-1988 Terminology for dies

Publish Date: 1988-02-29

GB/T 9453-1988 Replaced

GB/T 9453-1988 Terminology of forging dies and elements

Publish Date: 1988-06-24

GB/T 2851.1-1990 Replaced

GB/T 2851.1-1990 Sliding guide die sets for press tools—Diagonal pillar sets

Publish Date: 1990-07-23

GB/T 2851.3-1990 Replaced

GB/T 2851.3-1990 Sliding guide die sets for press tools—Back pillar sets

Publish Date: 1990-07-23

GB/T 2851.4-1990 Replaced

GB/T 2851.4-1990 Sliding guide die sets for press tools—Back pillar sets (narrow)

Publish Date: 1990-07-23