GB/T 20801.4-2006 Replaced National standards

GB/T 20801.4-2006 Pressure piping code—Industrial piping—Part 4:Fabrication and assembly

GB/T 20801.4-2006 Pressure piping code—Industrial piping—Part 4:Fabrication and assembly

Publish Date: 2006-12-30 Implement Date: 2007-06-01 For services related to genuine standard inquiry, procurement, translation, and other related services in China, please Contact Us

Basic Information

Standard Code: GB/T 20801.4-2006

Standard Type: National standards

Standard Status: Replaced

is_force_gb: no

CCS Name: Pressure vessel

ICS Name: Pipe components and pipelines

Publish Date: 2006-12-30

Implement Date: 2007-06-01

Pages: 27 pages

Scope

This section specifies the basic requirements for the fabrication and installation of pressure pipelines within the scope of GB/T 20801.1. These basic requirements include provisions for fabrication, welding, preheating, heat treatment, assembly and installation, and pipeline cleaning.

Development Information

Word Count: 51 Thousand words Pages: 27 pages

Same series standard

GB/T 20801.1-2006 Pressure piping code—Industrial piping—Part 1:General GB/T 20801.2-2006 Pressure piping code—Industrial piping—Part 2:Materials GB/T 20801.3-2006 Pressure piping code—Industrial piping—Part 3:Design and calculation GB/T 20801.5-2006 Pressure piping code—Industrial piping—Part 5:Inspection and testing GB/T 20801.6-2006 Pressure piping code—Industrial piping—Part 6:Safeguarding

Superseded by the following standards

GB/T 20801.4-2020 Pressure piping code—Industrial piping—Part 4:Fabrication and assembly

Referenced Standards

GB/T 17116.1-1997 Pipe supports and hangers—Part 1:Technical specification GB/T 20801.1-2006 Pressure piping code—Industrial piping—Part 1:General GB/T 20801.2-2006 Pressure piping code—Industrial piping—Part 2:Materials GB/T 20801.3-2006 Pressure piping code—Industrial piping—Part 3:Design and calculation GB/T 20801.5-2006 Pressure piping code—Industrial piping—Part 5:Inspection and testing JB 4708 锅炉压力容器压力管道焊工考试与管理规则

Related Standards

GB/T 8713-1988 Abolished

GB/T 8713-1988 Inside diameter required precision seamless steel tube for hydraulic and pneumatic cylinder use

Publish Date: 1988-02-22

GB/T 16805-1997 Replaced

GB/T 16805-1997 Pressure testing of liquid petroleum pipelines

Publish Date: 1997-05-28

GB/T 18443.2-2001 Replaced

GB/T 18443.2-2001 Testing method of cryo-insulation pressure vessels—Vacuum measurement

Publish Date: 2001-09-03

GB/T 15345-2003 Replaced

GB/T 15345-2003 Test methods of concrete pipes for water transmission

Publish Date: 2003-07-23

GB/T 19284-2003 Replaced

GB/T 19284-2003 Hyperbaric chamber pressurized with medical oxygen

Publish Date: 2003-09-11

GB/T 19285-2003 Replaced

GB/T 19285-2003 Inspection of corrosion protection for buried steel pipelines

Publish Date: 2003-09-11