GB/T 17340-1998
Active
WB/T 1036-2006
Active
Industry standards-Materials
WB/T 1036-2006 Glass fiber nets used for magnesite products
WB/T 1036-2006 Glass fiber nets used for magnesite products
Basic Information
Standard Code:
WB/T 1036-2006
Standard Type:
Industry standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Fiberglass
ICS Name:
Raw materials and unprocessed glass
Publish Date:
2006-12-31
Implement Date:
2007-07-01
Pages:
12 pages
Scope
This standard specifies the product classification, technical requirements, test methods, inspection rules, packaging, marking, transportation, and storage of fiberglass cloth. This standard applies to fiberglass yarn-woven netting. It is primarily used as a reinforcing material for magnesium carbonate products. It is not allowed to use high-alkali fiberglass cloth as a reinforcing material for magnesium carbonate products.
Development Information
Referenced Standards
JC 280
GB/T 191-2000 Packaging—Pictorial marking for handling of goods
GB/T 191-2008 Packaging—Pictorial marking for handling of goods
GB/T 1549-1994 Methods of chemical analysis of soda lime-alumina and borosilicate glass
GB/T 1549-2008 Chemical analysis methods of glass,glass marble and vitreous fiber
GB/T 2828.1-2003 Sampling procedures for inspection by attributes—Part 1:Sampling schemes indexed by acceptance quality limit(AQL) for lot-by-lot inspection
GB/T 2828.1-2012 Sampling procedures for inspection by attributes—Part 1:Sampling schemes indexed by acceptance quality limit(AQL) for lot-by-lot inspection
GB/T 7689.2-2001 Reinforcements—Test method for woven fabrics Part 2:Determination of number of yarns per unit length of warp and weft
GB/T 7689.2-2013 Reinforcements—Test method for woven fabrics—Part 2:Determination of number of yarns per unit length of warp and weft
GB/T 7689.3-2001 Reinforcements—Test method for woven fabrics Part 3:Determination of width and length
GB/T 7689.3-2013 Reinforcements—Test method for woven fabrics—Part 3:Determination of width and length
GB/T 7689.5-2001 Reinforcements—Test method for woven fabrics Part 5:Determination of tensile breaking force and elongation at break for glass fibre
GB/T 7689.5-2013 Reinforcements—Test method for woven fabrics—Part 5:Determination of glass fibre tensile breaking force and elongation at break
GB/T 7690.1-2001 Reinforcements—Test method for yarns Part 1:Determination of linear density
GB/T 7690.1-2013 Reinforcements—Test method for yarns—Part 1:Determination of linear density
GB/T 9914.1-2001 Test method for reinforcement products Part 1:Determination of moisture content
GB/T 9914.1-2013 Test method for reinforcement products—Part 1:Determination of moisture content
GB/T 9914.2-2001 Test method for reinforcement products Part 2:Determination of combustible-matter content for glass fibre
GB/T 9914.2-2013 Test method for reinforcement products—Part 2:Determination of combustible-matter content for glass fibre
GB/T 9914.3-2001 Test method for reinforcement products Part 3:Determination of mass per unit area
GB/T 9914.3-2013 The method for reinforcement products—Part 3:Determination of mass per unit area
GB/T 191-2025 Graphical symbols marking for handling and storage of packages
Related Standards
GB/T 9963-1998
Replaced
GB/T 9963-1998 Tempered glass
GB/T 17470-1998
Replaced
GB/T 17470-1998 Glass fiber chopped strand mat
GB/T 30020-2013
Replaced
GB/T 30020-2013 Test method for the defects of glass—Photoelastic scanning method
GB/T 30447-2013
Active
GB/T 30447-2013 Measurement method for contact angle of nano-film surface
GB/T 30452-2013
Active