GB/T 12712-1991
Replaced
GB/T 19913-2018
Active
National standards
GB/T 19913-2018 Cast iron heating radiator
GB/T 19913-2018 Cast iron heating radiator
Basic Information
Standard Code:
GB/T 19913-2018
Standard Type:
National standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Heating equipment and appliances
ICS Name:
\nCentral heating system
Publish Date:
2018-02-06
Implement Date:
2019-01-01
Pages:
12 pages
Scope
This standard specifies the terms and definitions, classification and marking, requirements, test methods, inspection rules, marking, packaging, transportation, and storage of cast iron heating radiators (hereinafter referred to as radiators). This standard applies to heating systems in industrial and civil buildings, using hot water with a temperature not exceeding 130 °C and steam with a pressure not exceeding 0.2 MPa as the heat medium for cast iron radiators.
Development Information
Replace the following standards
Referenced Standards
GB/T 1732-1993 Determination of impact resistance of film
GB/T 1732-2020 Determination of impact resistance of coating films
GB/T 2828.1-2003 Sampling procedures for inspection by attributes—Part 1:Sampling schemes indexed by acceptance quality limit(AQL) for lot-by-lot inspection
GB/T 2828.1-2012 Sampling procedures for inspection by attributes—Part 1:Sampling schemes indexed by acceptance quality limit(AQL) for lot-by-lot inspection
GB/T 6414-1999 Castings—System of dimensional tolerances and machining allowances
GB/T 6414-2017 Castings—Dimensional tolerances and geometrical tolerances and machining allowances
GB/T 7307-2001 Pipe threads with 55 degree thread angle where pressure-tight joints are not made on the threads
GB/T 9286-1998 Paints and varnishes—Cross cut test for films
GB/T 9286-2021 Paints and varnishes—Cross-cut test
GB/T 9439-1988 Grey iron castings
GB/T 9439-2010 Grey iron castings
GB/T 9439-2023 Grey iron castings
GB/T 9969-2008 General principles for preparation of instructions for use of industrial products
GB 9969.1-1998 General principles for preparation of instructions for use of industrial products
GB/T 11351-1989 Mass tolerances for castings
GB/T 11351-2017 Mass tolerances of casting
GB/T 13754-1992 Test method of thermal output of heat emittor
GB/T 13754-2008 Test methods of thermal output of heating radiators
GB/T 13754-2017 Test methods of thermal output of heating radiators
GB/T 16803-1997 Equipment of heating, ventilating,air conditioning and air cleaning terminology
GB/T 16803-2018 Equipment of heating,ventilating,air conditioning and air cleaning terminology
HG/T 2006-2022 Hot-melt and thermoplastic powder coatings
HG/T 2006-2006 Hot-fix powder coating
JB/T 7945.1-2018 Mechanical Properties Test Method for Grey Iron - Part 1: Tensile Test Method
JB/T 7945.2-2018 JB/T 7945.2-2018 - Grey iron mechanical properties testing method Part 2: Flexural test results
HG/T 2006-1991 Fridge using powder coating
JB/T 7945-1999 Methods for testing the mechanical properties of grey cast iron
Related Standards
GB 4706.71-2003
Replaced
GB 4706.71-2003 Safety of household and similar electrical appliances—Particular requirements for stationary circulation pumps for heating and service installations
GB/T 13754-2008
Replaced
GB/T 13754-2008 Test methods of thermal output of heating radiators
GB 4706.71-2008
Active
GB 4706.71-2008 Household and similar electrical appliances—Safety—Particular requirements for stationary circulation pumps for heating and service water installations
JG/T 362-2012
Active
JG/T 362-2012 Heat-allocation device based on temperature determination
GB/T 29039-2012
Active