GB/T 4585.1-1984
Abolished
DL/T 1000.2-2015
Active
Industry standards-Electricity
DL/T 1000.2-2015 Guidelines for Use of Insulators for Overhead Lines with a Nominal Voltage above 1000V - Part 2: Ceramic or Glass Insulators for DC Systems
DL/T 1000.2-2015 Guidelines for Use of Insulators for Overhead Lines with a Nominal Voltage above 1000V - Part 2: Ceramic or Glass Insulators for DC Systems
Basic Information
Standard Code:
DL/T 1000.2-2015
Standard Type:
Industry standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Insulator
ICS Name:
Insulator
Publish Date:
2015-07-01
Implement Date:
2015-12-01
Pages:
14 pages
Scope
This section applies to DC overhead lines with a nominal voltage of more than 1000V and suspension ceramic or glass insulators used in converter stations (hereinafter referred to as insulators). The installation site is located at an altitude of less than 1000m, and the ambient temperature ranges from -40°C to +40°C.
Development Information
Same series standard
Replace the following standards
Related Standards
GB/T 775.1-1987
Replaced
GB/T 775.1-1987 Test method for insulators—Part 1:General test methods
GB/T 775.3-1987
Replaced
GB/T 775.3-1987 Test method for insulators—Part 3:Mechanical test methods
GB/T 7253-1987
Replaced
GB/T 7253-1987 The string insulator units of the cap and pin type—Dimensions and characteristics
GB 12744-1991
Replaced
GB 12744-1991 Outdoor antipollution-type solid-core post insulators of ceramic material
GB/T 4585.2-1991
Abolished