GB/T 6915-1986
Abolished
GB/T 20994-2007
Active
National standards
GB/T 20994-2007 Shunt capacitors and AC filter capacitors for HVDC transmission systems
GB/T 20994-2007 Shunt capacitors and AC filter capacitors for HVDC transmission systems
Basic Information
Standard Code:
GB/T 20994-2007
Standard Type:
National standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Power capacitors
ICS Name:
Power capacitors
Publish Date:
2007-06-21
Implement Date:
2008-02-01
Pages:
26 pages
Scope
This standard applies to parallel capacitors and parallel capacitor banks installed on the AC side of high-voltage DC transmission converter stations, which are used to provide reactive power compensation, as well as AC filter capacitors and AC filter capacitor banks used to filter AC-side harmonics and provide reactive power compensation at a fundamental frequency of 50 Hz or 60 Hz. The purpose of this standard is to: a) set out unified rules regarding performance, testing, and specifications; b) establish special safety rules; c) provide installation and operation guidelines.
Development Information
Referenced Standards
GB/T 11024.1-2001 Shunt capacitors for a.c. power systems having a rated voltage above 1kV—Part 1:General—Performance, testing and rating—Safety requirements—Guide for installation and operation
GB/T 11024.1-2010 Shunt capacitors for a.c. power systems having a rated voltage above 1 000 V—Part 1:General
GB/T 11024.1-2019 Shunt capacitors for a.c.power systems having a rated voltage above 1 000 V—Part 1:General
GB/T 11024.2-2001 Shunt capacitors for a.c. power systems having a rated voltage above 1kV—Part 2:Endurance testing
GB/T 11024.2-2019 Shunt capacitors for a.c.power systems having a rated voltage above 1 000 V—Part 2:Ageing testing
GB/T 11024.4-2001 Shunt capacitors for a.c. power systems having a rated voltage above 1kV—Part 4:Internal fuses
GB/T 11024.4-2019 Shunt capacitors for a.c.power systems having a rated voltage above 1 000 V—Part 4:Internal fuses
GB/T 13540-1992 Anti-seismic characteristic test for high-voltage switchgear
GB/T 13540-2009 Seismic qualification for high-voltage switchgear and controlgear
GB/T 16927.1-1997 High-voltage test techniques Part 1:General test requirements
GB/T 16927.1-2011 High-voltage test techniques—Part 1:General definitions and test requirements
Related Standards
GB/T 13865-1992
Abolished
GB/T 13865-1992 Instrument for electric load control
GB/T 6916-1997
Replaced
GB/T 6916-1997 Power capacitors for damp tropics
GB 3667-1997
Replaced
GB 3667-1997 A.C. motor capacitors
GB/T 17702.1-1999
Replaced
GB/T 17702.1-1999 Power electronic capacitors—Part 1:General
GB/T 17702.2-1999
Replaced