GB/T 16731-1997
Replaced
JG/T 398-2012
Abolished
Industry standards-The construction industry
JG/T 398-2012 The grouting coupler for rebars splicing
JG/T 398-2012 The grouting coupler for rebars splicing
Basic Information
Standard Code:
JG/T 398-2012
Standard Type:
Industry standards
Standard Status:
Abolished
is_force_gb:
no
CCS Name:
Building components and equipment
ICS Name:
Building components
Publish Date:
2012-10-29
Implement Date:
2013-01-01
Pages:
12 pages
Scope
This standard specifies the terms and definitions, classification and models, requirements, test methods, inspection rules, marking, packaging, transportation, and storage of grouting sleeves for reinforcing bar connections (hereinafter referred to as grouting sleeves).
This standard applies to sleeves used for grouting connections of hot-rolled ribbed or post-heat-treated reinforcing bars with a diameter of 12 mm to 40 mm in reinforced concrete structures.
Development Information
Superseded by the following standards
Referenced Standards
GB/T 197-2003 General purpose metric screw threads—Tolerances
GB/T 197-2018 General purpose metric screw threads—Tolerances
GB/T 228.1-2010 Metallic materials—Tensile testing—Part 1:Method of test at room temperature
GB/T 228.1-2021 Metallic materials—Tensile testing—Part 1:Method of test at room temperature
GB/T 231.1-2002 Metallic materials—Brinell hardness test—Part 1:Test method
GB/T 231.1-2009 Metallic materials—Brinell hardness test—Part 1:Test method
GB/T 231.1-2018 Metallic materials—Brinell hardness test—Part 1:Test method
GB/T 699-1999 Quality carbon structural steels
GB/T 699-2015 Quality carbon structure steels
GB/T 1348-1988 Spheroidal graphite iron castings
GB/T 1348-2009 Spheroidal graphite iron castings
GB/T 1348-2019 Spheroidal graphite iron castings
GB/T 1499.2-2007 Steel for the reinforcement of concrete—Part 2:Hot rolled ribbed bars
GB/T 1499.2-2018 Steel for the reinforcement of concrete—Part 2:Hot rolled ribbed bars
GB 1499.2-2024 Steel for the reinforcement of concrete—Part 2:Hot rolled ribbed bars
GB/T 1591-1994 High strength low alloy structural steels
GB/T 1591-2008 High strength low alloy structural steels
GB/T 1591-2018 High strength low alloy structural steels
GB/T 2975-1998 Steel and steel products—Location and preparation of test pieces for mechanical testing
GB/T 2975-2018 Steel and steel products—Location and preparation of samples and test pieces for mechanical testing
GB/T 3077-1999 Alloy structure steels
GB/T 3077-2015 Alloy structure steels
GB/T 8162-1999 Seamless steel tubes for structural purposes
GB/T 8162-2008 Seamless steel tubes for structural purposes
GB/T 8162-2018 Seamless steel tubes for structural purposes
GB/T 9174-1988 General specification for transport packages of general cargo
GB/T 9174-2008 General specification for transport packages of general cargo
GB/T 9441-1988 Metallographic test for spheroidal graphite cast iron
GB/T 9441-2009 Metallographic test for spheroidal graphite cast iron
GB/T 9441-2021 Metallographic test method for spheroidal graphite cast iron
GB 13014-1991 Remained heat treatment ribbed steel bars for the reinforcement of concrete
GB/T 13014-2013 Quenching and self-tempering ribbed bars for the reinforcement of concrete
GB/T 13298-1991 Metal—Inspection method of microstructure
GB/T 13298-2015 Inspection methods of microstructure for metals
JGJ 107-2003 General technical specification for mechanical splicing of bars
JGJ 107-2016 Rebar Mechanical Connection Technology Code (with Explanation)
Related Standards
GB/T 11981-2001
Replaced
GB/T 11981-2001 Steel furrings for buildings
JG 138-2001
Replaced
JG 138-2001 The support device of point supported glass curtain wall
JG/T 139-2001
Replaced
JG/T 139-2001 The support device of suspended glass curtain wall
GB/T 11981-2008
Replaced
GB/T 11981-2008 Steel furring for building
GB/T 23443-2009
Replaced