GB/T 12667-1990
Replaced
GB/T 16439-2009
Replaced
National standards
GB/T 16439-2009 General specification for AC servo system
GB/T 16439-2009 General specification for AC servo system
Basic Information
Standard Code:
GB/T 16439-2009
Standard Type:
National standards
Standard Status:
Replaced
is_force_gb:
no
CCS Name:
Micro motor
ICS Name:
Electric motor
Publish Date:
2009-09-30
Implement Date:
2010-02-01
Pages:
24 pages
Scope
This standard specifies the definitions and terminology, operating conditions, technical requirements, and test methods, inspection rules, and delivery preparation for AC servo systems. This standard applies to AC servo systems with an AC rated voltage of no more than 1,000 V and a frequency of no more than 1,000 Hz, and a DC rated voltage of no more than 1,500 V. This standard applies to AC servo systems (hereinafter referred to as "servo systems") and the AC servo drives (hereinafter referred to as "drives") and AC servo motors (hereinafter referred to as "motors") that constitute the servo systems. The content of this standard does not cover the sensing part, but the content of this part should be specified in the product-specific technical conditions. For technical requirements related to servo systems that are not included in this standard, they shall be implemented in accordance with the provisions of relevant motor standards and industrial mechanical electrical control equipment standards.
Development Information
Replace the following standards
Superseded by the following standards
Referenced Standards
GB/T 2423.1-2001 Environmental testing for electric and electronic products—Part 2:—Test methods Tests A:Cold
GB/T 2423.2-2001 Environmental testing for electric and electronic products—Part 2:Test methods-Tests B:Dry heat
GB/T 2423.3-1993 Basic environmental testing procedures for electric and electronic products—Test Ca:Damp heat, steady state
GB/T 2423.3-2006 Environmental testing for electric and electronic products—Part 2:Testing method—Test Cab:Damp heat, steady state
GB/T 2423.3-2016 Environmental testing—Part 2:Testing method—Test Cab:Damp heat,steady state
GB/T 2423.5-1995 Environmental testing for electric and electronic products—Part 2:Test methods—Test Ea and guidance:Shock
GB/T 2423.5-2019 Environmental testing—Part 2:Test methods—Test Ea and guidance:Shock
GB/T 2423.10-1995 Environmental testing for electric and electronic products—Part 2:Test methods—Test Fc and guidance:Vibration (Sinusoidal)
GB/T 2423.10-2008 Environmental testing for electric and electronic products—Part 2:Tests methods Test Fc:Vibration(sinusoidal)
GB/T 2423.10-2019 Environmental testing—Part 2:Tests methods—Test Fc:Vibration(sinusoidal)
GB/T 2423.15-1995 Environmental testing for electric and electronic products—Part 2:Test methods—Test Ga and guidance:Acceleration, steady state
GB/T 2423.15-2008 Environmental testing for electric and electronic products—Part 2:Tests methods—Test Ga and guidance: Acceleration,steady
GB/T 2828.1-2003 Sampling procedures for inspection by attributes—Part 1:Sampling schemes indexed by acceptance quality limit(AQL) for lot-by-lot inspection
GB 4824-2004 Industrial, scientific and medical(ISM) radio-frequency equipment—Electromagnetic disturbance characteristics—Limits and methods of measurement
GB/T 5080.1-1986 Equipment reliability testing—General requirements
GB/T 5080.1-2012 Reliability testing—Part 1:Test conditions and statistical test principles
GB 7251.1-2005 Low-voltage switchgear and control gear assemblies—Part 1:Type-tested and partially type-tested assemblies
GB/T 7345-1994 General requirements for electrical micro machine for automatic control system
GB/T 7345-2008 General requirements for electrical machine for automatic control system
GB/T 10069.1-2006 Measurement of the airborne noise emitted by rotating electrical machines and the noise limits—Part 1:Method for the measurement of airborne noise emitted by rotating electrical machines
GB/T 17626.2-1998 Electromagnetic compatibility—Testing and measurement techniques—Electrostatic discharge immunity test
GB/T 17626.2-2006 Electromagnetic compatibility—Testing and measurement techniques—Electrostatic discharge immunity test
GB/T 17626.2-2018 Electromagnetic compatibility—Testing and measurement techniques—Electrostatic discharge immunity test
GB/T 17626.3-1998 Electromagnetic compatibility—Testing and measurement techniques-Radiated, radio-frequency, electromagnetic field immunity test
GB/T 17626.3-2006 Electromagnetic compatibility—Testing and measurement techniques—Radiated, radio-frequency, electromagnetic field immunity test
GB/T 17626.3-2016 Electromagnetic compatibility—Testing and measurement techniques—Radiated,radio-frequency,electromagnetic field immunity test
GB/T 17626.3-2023 Electromagnetic compatibility—Testing and measurement techniques—Part 3:Radiated,radio-frequency,electromagnetic field immunity test
GB/T 17626.4-1998 Electromagnetic compatibility—Testing and measurement techniques—Electrical fast transient/burst immunity test
GB/T 17626.4-2008 Electromagnetic compatibility—Testing and measurement techniques—Electrical fast transient/burst immunity test
GB/T 17626.4-2018 Electromagnetic compatibility—Testing and measurement techniques—Electrical fast transient/burstimmunity test
GB/T 17626.5-1999 Electromagnetic compatibility—Testing and measurement techniques—Surge immunity test
GB/T 17626.5-2008 Electromagnetic compatibility—Testing and measurement techniques—Surge immunity test
GB/T 17626.5-2019 Electromagnetic compatibility—Testing and measurement techniques—Surge immunity test
GB/T 17626.6-1998 Electromagnetic compatibility—Testing and measurement techniques—Immunity to conducted disturbances, induced by radio-frequency fields
GB/T 17626.6-2008 Electromagnetic compatibility—Testing and measurement techniques—Immunity to conducted disturbances,induced by radio-frequency fields
GB/T 17626.6-2017 Electromagnetic compatibility—Testing and measurement techniques—Immunity to conducted disturbances,induced by radio-frequency fields
GB/T 17626.11-1999 Electromagnetic compatibility—Testing and measurement techniques—Voltage dips, short interruptions and voltage variations immunity tests
GB/T 17626.11-2008 Electromagnetic compatibility—Testing and measurement techniques—Voltage dips,short interruptions and voltage variations immunity tests
GB/T 17626.11-2023 Electromagnetic compatibility—Testing and measurement techniques—Part 11:Voltage dips, short interruptions and voltage variations immunity tests for equipment with input current up to 16 A per phase
GB/T 17626.29-2006 Electromagnetic compatibility—Testing and measurement techniques—Voltage dips, short interruptions and voltage variations on d.c .input power port immunity tests
GJB/Z 299C-2006
JB/T 3085-1999 Product Packaging and Transportation Procedures for Power Transmission and Control Devices
JB/T 8162-2016 JBT 8162-2016 Control Motor Packaging Technical Specification
JB/T 8162-1999 Controlled Micro-motor Packaging Technical Conditions
Related Standards
GB/T 12974-1991
Replaced
GB/T 12974-1991 General specification for a.c. lift motors
GB/T 13138-1991
Replaced
GB/T 13138-1991 Synchros General specification for
GB/T 13139-1991
Replaced
GB/T 13139-1991 Hysteresis synchronous motors General specification for
GB/T 13500-1992
abolished_transferred
GB/T 13500-1992 Three phase asynchronous motors for hermetic refrigeration compressors—General specifications
GB/T 13501-1992
Replaced