GB/T 24319-2009 Active National standards

GB/T 24319-2009 Technical conditions of cauldron-using mechanical seal for high pressure

GB/T 24319-2009 Technical conditions of cauldron-using mechanical seal for high pressure

Publish Date: 2009-09-30 Implement Date: 2010-01-01 For services related to genuine standard inquiry, procurement, translation, and other related services in China, please Contact Us

Basic Information

Standard Code: GB/T 24319-2009

Standard Type: National standards

Standard Status: Active

is_force_gb: no

CCS Name: Chemical machinery and equipment parts

ICS Name: Seals, sealing devices

Publish Date: 2009-09-30

Implement Date: 2010-01-01

Pages: 5 pages

Scope

This standard specifies the structural types, requirements, marking and packaging, complete supply, and acceptance rules for high-pressure mechanical seals used in reactors.
This standard applies to high-pressure mechanical seals for vertical mixing shafts in reactors made of carbon steel and stainless steel. Its operating parameters are: the pressure inside the reactor is 6.3 MPa to 10 MPa (gauge pressure); the temperature inside the reactor is not more than 350 ℃; the diameter of the mixing shaft is 30 mm to 220 mm; and the linear velocity is not more than 3 m/s.

Development Information

Word Count: 7 Thousand words Pages: 5 pages

Referenced Standards

GB/T 1184-1996 Geometrical tolerancing—Geometrical tolerance for features without individual tolerance indications GB/T 1239.2-2009 Cold coiled helical springs technical specifications—Part 2:Compressions spring GB/T 1804-2000 General tolerances for linear and angular dimensions without individual tolerance indications JB 4726 JB 4728 HG/T 2098-2011 HG/T 2098-2011 Baking pots mechanical seal types, main dimensions and marks HG/T 2099-2003 Pouring machine seal test specifications JB/T 7369-2011 Mechanical seal face planarity inspection method HG/T 2098-2001 Pouring machine seal series and main parameters JB/T 7369-1994 Mechanical seal face planarity inspection method HG/T 2122-2003 Auxiliary facilities for stirred vessels mechanical seals

Related Standards

GB/T 5894-1986 Replaced

GB/T 5894-1986 The terms of mechanical seal

Publish Date: 1986-03-01

GB/T 6656-1986 Replaced

GB/T 6656-1986 DC ferrite permanent magnet motors

Publish Date: 1986-08-05

GB/T 9877.1-1988 Replaced

GB/T 9877.1-1988 Rotary shaft lip seals—Design criteria for standard applications—Part 1:rubber covered rotary shaft lip seals

Publish Date: 1988-09-20

GB/T 9877.2-1988 Replaced

GB/T 9877.2-1988 Rotary shaft lip seals—Design criteria for standard applications—Part 2:metal cased rotary shaft lip seals

Publish Date: 1988-09-20

GB/T 9877.3-1988 Replaced

GB/T 9877.3-1988 Rotary shaft lip seals—Design criteria for standard applications—Part 3:assembled rotary shaft lip seals

Publish Date: 1988-09-20

GB 13871-1992 Replaced

GB 13871-1992 Rotary shaft lip type seals—Nominal dimensions and tolerances

Publish Date: 1992-12-12