GB/T 19292.2-2018 Active National standards

GB/T 19292.2-2018 Corrosion of metals and alloys—Corrosivity of atmospheres—Part 2:Guiding values for the corrosivity categories

Publish Date: 2018-05-14 Implement Date: 2019-02-01 For services related to genuine standard inquiry, procurement, translation, and other related services in China, please Contact Us

Basic Information

Standard Code: GB/T 19292.2-2018

Standard Type: National standards

Standard Status: Active

is_force_gb: no

CCS Name: \nTest methods for the chemical properties of metals

ICS Name: The corrosion of metals

Publish Date: 2018-05-14

Implement Date: 2019-02-01

Pages: 13 pages

Scope

This part of GB/T 19292 specifies the corrosion guidance values for metals and alloys exposed to outdoor natural atmospheric environments for more than one year. This part is used in conjunction with GB/T 19292.1.
The guidance values provide the corrosion rates of standard structural materials, which can be used for engineering calculations. The guidance values specify the technical content of each corrosion grade of standard metals.
Appendix A provides calculation examples of the maximum corrosion loss for six standard corrosion grades exposed to outdoor environments for up to 20 years.
Appendix B provides the average corrosion rates and steady-state corrosion rates of standard metals in the early stages of exposure to outdoor environments for six standard corrosion grades.
Appendix C provides a method for calculating corrosion losses based on the composition of steel.

Development Information

Word Count: 26 Thousand words Pages: 13 pages

Same series standard

GB/T 19292.1-2018 Corrosion of metals and alloys—Corrosivity of atmospheres—Part 1:Classification,determination and estimation GB/T 19292.3-2018 Corrosion of metals and alloys—Corrosivity of atmospheres—Part 3:Measurement of environmental parameters affecting corrosivity of atmospheres GB/T 19292.4-2018 Corrosion of metals and alloys—Corrosivity of atmospheres—Part 4:Determination of corrosion rate of standard specimens for the evaluation of corrosivity

Replace the following standards

GB/T 19292.2-2003 Corrosion of metals and alloys—Corrosivity of atmospheres—Guiding values for the corrosivity categories

Referenced Standards

GB/T 10123-2001 Corrosion of metals and alloys Basic terms and definitions GB/T 10123-2022 Corrosion of metals and alloys—Vocabulary GB/T 19292.1-2003 Corrosion of metals and alloys—Corrosivity of atmospheres—Classification GB/T 19292.1-2018 Corrosion of metals and alloys—Corrosivity of atmospheres—Part 1:Classification,determination and estimation GB/T 19355.1-2016 Zinc coatings—Guidelines and recommendations for the protection against corrosion of iron and steel in structures—Part 1:General principles of design and corrosion resistance

Adopt standards

ISO 9224:2012

Related Standards

GB/T 5776-1986 Replaced

GB/T 5776-1986 Method for surface seawater exposure corrosion tests of metallic materials

Publish Date: 1986-01-14

GB/T 10119-1988 Replaced

GB/T 10119-1988 Copper-zinc alloys—Determination of dezincification corrosion resistance

Publish Date: 1988-12-10

GB/T 13671-1992 Replaced

GB/T 13671-1992 Stainless steels—Method of electrochemical test for crevice corrosion

Publish Date: 1992-09-22

GB/T 15748-1995 Replaced

GB/T 15748-1995 The method of galvanic corrosion test for metallic ship materials

Publish Date: 1995-11-20

GB/T 16545-1996 Replaced

GB/T 16545-1996 Corrosion of metals and alloys—Removal of corrosion products from corrosion test specimens

Publish Date: 1996-09-27

GB/T 15970.5-1998 Active

GB/T 15970.5-1998 Corrosion of metals and alloy—Stress corrosion testing—Part 5:Preparation and use of C-ring specimens

Publish Date: 1998-12-07