GB/T 1525-1979
Replaced
GB/T 13505-2007
Active
National standards
GB/T 13505-2007 Pure insulating pulp
GB/T 13505-2007 Pure insulating pulp
Basic Information
Standard Code:
GB/T 13505-2007
Standard Type:
National standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Paper pulp and cardboard
ICS Name:
Paper and cardboard
Publish Date:
2007-12-05
Implement Date:
2008-09-01
Pages:
6 pages
Scope
This standard specifies the product classification, technical requirements, test methods, inspection rules, marking, packaging, transportation, and storage of high-purity insulating wood pulp. This standard is applicable to the production of various types of capacitor pulp, as well as the production of high-voltage insulating pulp with voltages ranging from 110 kV to 330 kV and above.
Development Information
Replace the following standards
Referenced Standards
GB/T 10740-1989
GB/T 10740-2002 Pulp—Estimation of dirt and shives
QB/T 3704
GB/T 740-2003 Pulps—Sampling for testing
GB/T 742-2003 Paper,board and pulp—Determination of residue(ash) on ignition at 900℃
GB/T 742-2008 Fibrous raw material,pulp,paper and board—Determination of ash
GB/T 742-2018 Fibrous raw material,pulp,paper and board—Determination of residue(ash)on ignition at 575 ℃ and 900 ℃
GB/T 1545.1-2003 Paper, board and pulp-Determination of acidity or alkalinity
GB/T 1546-2004 Pulps-Determination of Kappa number
GB/T 1546-2018 Pulp—Determination of Kappa number
GB/T 1548-2004 Pulps-Determination of viscosity
GB/T 1548-2016 Pulps—Determination of limiting viscosity number in cupri-ethylenediamine(CED) solution
GB/T 2678.2-1994 Paper, board and pulp—Determination of water soluble chlorides(HgNO3 method)
GB/T 2678.2-2008 Paper, board and pulp—Determination of water soluble chlorides
GB/T 2678.2-2021 Paper,board and pulps—Determination of water-soluble chlorides
GB/T 2678.5-1996 Paper, board and pulp—Determination of water soluble chlorides (AgNO3, method)
GB/T 2828.1-2003 Sampling procedures for inspection by attributes—Part 1:Sampling schemes indexed by acceptance quality limit(AQL) for lot-by-lot inspection
GB/T 2828.1-2012 Sampling procedures for inspection by attributes—Part 1:Sampling schemes indexed by acceptance quality limit(AQL) for lot-by-lot inspection
GB/T 3332-2004 Pulps-Determination of beating degree(Schopper-Riegler method)
GB/T 7977-2007 Paper, board and pulps—Determination of conductivity of aqueous extracts
GB/T 7979-2005 Pulps—Determination of dichloromethane soluble matter
GB/T 7979-2020 Pulp—Determination of dichloromethane soluble matter
GB/T 8943.2-2008 Paper,board and pulps—Determination of iron
GB/T 8944.1-2008 Pulps—Determination of saleable mass in lots—Part 1:Pulp baled in sheet form or pulps(such as flash-dried pulps)baled in slabs
GB/T 10739-2002 Paper, board and pulps—Standard atmosphere for conditioning and testing
GB/T 10739-2023 Paper,board and pulps—Standard atmosphere for conditioning and testing
QB/T 3702-1999 Pulps-laboratory beating-Valley beater method
QB/T 3703-1999 Pulps-Preparation of laboratory sheets conventional sheet-former method
Related Standards
GB/T 2675-1981
Replaced
GB/T 2675-1981 Paper for drawing land maps
GB/T 2676-1981
Replaced
GB/T 2676-1981 Paper for drawing ocean maps
GB/T 4687-1984
Replaced
GB/T 4687-1984 Paper, board, pulp terms (Ⅰ)
GB/T 4873-1985
Active
GB/T 4873-1985 Continuous forms used for information processing—Sizes and feed holes
GB/T 5034-1985
Replaced