GB/T 15306.2-2008 Active National standards

GB/T 15306.2-2008 Indexable inserts for cutting tools—Ceramic inserts with rounded corners—Part 2:Dimensions of inserts with cylindrical fixing hole

Publish Date: 2008-06-03 Implement Date: 2009-01-01 For services related to genuine standard inquiry, procurement, translation, and other related services in China, please Contact Us

Basic Information

Standard Code: GB/T 15306.2-2008

Standard Type: National standards

Standard Status: Active

is_force_gb: no

CCS Name: Knives

ICS Name: Cutting tools comprehensive

Publish Date: 2008-06-03

Implement Date: 2009-01-01

Pages: 12 pages

Scope

This part of GB/T 15306 specifies the dimensions of indexable inserts with a rounded knife tip, a cylindrical fixing hole, and a normal back angle of 0°, made from ceramic cutting materials. These inserts are mainly clamped on lathe and boring tool rods from the top and the hole, or only through the hole. This part is applicable to various indexable inserts with holes made from ceramic cutting materials.

Development Information

Word Count: 19 Thousand words Pages: 12 pages

Same series standard

GB/T 15306.1-2008 Indexable inserts for cutting tools—Ceramic inserts with rounded corners—Part 1:Dimensions of inserts without fixing hole(Class G) GB/T 15306.3-2008 Indexable inserts for cutting tools—Ceramic inserts with rounded corners—Part 3:Dimensions of inserts without fixing hole(Class U) GB/T 15306.4-2008 Indexable inserts for cutting tools—Ceramic inserts with rounded corners—Part 4:Specifications

Replace the following standards

GB/T 15306.2-1994 Indexable inserts for cutting tools—Ceramic inserts with rounded corners—Dimensions of inserts with cylindrical fixing hole

Referenced Standards

GB/T 2075-1998 Application of hard cutting materials for machining by chip removal—Designation of the main groups of chip removal and groups of application GB/T 2075-2007 Classification and application of hard cutting materials for metal removal with defined cutting edges—Designation of the main groups and groups of application GB/T 2076-1987 Indexable inserts for cutting tools—Designation GB/T 2076-2007 Indexable inserts for cutting tools—Designation GB/T 2076-2021 Indexable inserts for cutting tools—Designation GB/T 15306.4-1994 Indexable inserts for cutting tools—Ceramic inserts with rounded corners—Specifications GB/T 15306.4-2008 Indexable inserts for cutting tools—Ceramic inserts with rounded corners—Part 4:Specifications GB/T 2075-2025 Classification and application of hard cutting materials for metal removal with defined cutting edges—Designation of the main groups and groups of application

Adopt standards

ISO 9361-2:1991

Related Standards

GB/T 2075-1998 Replaced

GB/T 2075-1998 Application of hard cutting materials for machining by chip removal—Designation of the main groups of chip removal and groups of application

Publish Date: 1998-02-27

GB/T 17983-2000 Active

GB/T 17983-2000 Classification and designation of approximate chip control zones for indexable inserts with chipbreakers

Publish Date: 2000-02-18

GB/T 1442-2004 Active

GB/T 1442-2004 Driving tenons and sockets for parallel shank tools—Dimensions

Publish Date: 2004-02-10

GB/T 2075-2007 Replaced

GB/T 2075-2007 Classification and application of hard cutting materials for metal removal with defined cutting edges—Designation of the main groups and groups of application

Publish Date: 2007-07-26

GB/T 15306.1-2008 Active

GB/T 15306.1-2008 Indexable inserts for cutting tools—Ceramic inserts with rounded corners—Part 1:Dimensions of inserts without fixing hole(Class G)

Publish Date: 2008-06-03

GB/T 15306.3-2008 Active

GB/T 15306.3-2008 Indexable inserts for cutting tools—Ceramic inserts with rounded corners—Part 3:Dimensions of inserts without fixing hole(Class U)

Publish Date: 2008-06-03