GB/T 15306.3-2008 Active National standards

GB/T 15306.3-2008 Indexable inserts for cutting tools—Ceramic inserts with rounded corners—Part 3:Dimensions of inserts without fixing hole(Class U)

Publish Date: 2008-06-03 Implement Date: 2009-01-01 For services related to genuine standard inquiry, procurement, translation, and other related services in China, please Contact Us

Basic Information

Standard Code: GB/T 15306.3-2008

Standard Type: National standards

Standard Status: Active

is_force_gb: no

CCS Name: Knives

ICS Name: Cutting tools comprehensive

Publish Date: 2008-06-03

Implement Date: 2009-01-01

Pages: 15 pages

Scope

This part of GB/T 15306 specifies the dimensions of indexable inserts made of ceramic cutting materials with a rounded knife tip, no fixed holes, a normal back angle of 0°, and a precision of U grade. These inserts are mainly clamped from the top on the shanks of turning tools and boring tools. This part is applicable to U-grade non-holed indexable inserts made of various ceramic cutting materials.

Development Information

Word Count: 27 Thousand words Pages: 15 pages

Same series standard

GB/T 15306.1-2008 Indexable inserts for cutting tools—Ceramic inserts with rounded corners—Part 1:Dimensions of inserts without fixing hole(Class G) GB/T 15306.2-2008 Indexable inserts for cutting tools—Ceramic inserts with rounded corners—Part 2:Dimensions of inserts with cylindrical fixing hole GB/T 15306.4-2008 Indexable inserts for cutting tools—Ceramic inserts with rounded corners—Part 4:Specifications

Replace the following standards

GB/T 15306.3-1994 Indexable inserts for cutting tools—Ceramic inserts with rounded corners—Dimensions of inserts without fixing hole(Class U)

Referenced Standards

GB/T 2075-1998 Application of hard cutting materials for machining by chip removal—Designation of the main groups of chip removal and groups of application GB/T 2075-2007 Classification and application of hard cutting materials for metal removal with defined cutting edges—Designation of the main groups and groups of application GB/T 2076-1987 Indexable inserts for cutting tools—Designation GB/T 2076-2007 Indexable inserts for cutting tools—Designation GB/T 2076-2021 Indexable inserts for cutting tools—Designation GB/T 15306.4-1994 Indexable inserts for cutting tools—Ceramic inserts with rounded corners—Specifications GB/T 15306.4-2008 Indexable inserts for cutting tools—Ceramic inserts with rounded corners—Part 4:Specifications GB/T 2075-2025 Classification and application of hard cutting materials for metal removal with defined cutting edges—Designation of the main groups and groups of application

Related Standards

GB/T 2075-1998 Replaced

GB/T 2075-1998 Application of hard cutting materials for machining by chip removal—Designation of the main groups of chip removal and groups of application

Publish Date: 1998-02-27

GB/T 17983-2000 Active

GB/T 17983-2000 Classification and designation of approximate chip control zones for indexable inserts with chipbreakers

Publish Date: 2000-02-18

GB/T 1442-2004 Active

GB/T 1442-2004 Driving tenons and sockets for parallel shank tools—Dimensions

Publish Date: 2004-02-10

GB/T 2075-2007 Replaced

GB/T 2075-2007 Classification and application of hard cutting materials for metal removal with defined cutting edges—Designation of the main groups and groups of application

Publish Date: 2007-07-26

GB/T 15306.1-2008 Active

GB/T 15306.1-2008 Indexable inserts for cutting tools—Ceramic inserts with rounded corners—Part 1:Dimensions of inserts without fixing hole(Class G)

Publish Date: 2008-06-03

GB/T 15306.2-2008 Active

GB/T 15306.2-2008 Indexable inserts for cutting tools—Ceramic inserts with rounded corners—Part 2:Dimensions of inserts with cylindrical fixing hole

Publish Date: 2008-06-03