GB/T 15613.2-2008 Replaced National standards

GB/T 15613.2-2008 Model acceptance tests of hydraulic turbines,storage pumps and pump-turbines—Part 2:Main hydraulic performance test

Publish Date: 2008-06-30 Implement Date: 2009-04-01 For services related to genuine standard inquiry, procurement, translation, and other related services in China, please Contact Us

Basic Information

Standard Code: GB/T 15613.2-2008

Standard Type: National standards

Standard Status: Replaced

is_force_gb: no

CCS Name: \nHydraulic turbines and their auxiliary equipment

ICS Name: Hydraulic engineering

Publish Date: 2008-06-30

Implement Date: 2009-04-01

Pages: 71 pages

Scope

This part of GB/T 15613 is applicable to various types of impact and reaction turbines, storage pumps, or pump-turbines tested under laboratory conditions. This part is applicable to models corresponding to prototypes with a unit power greater than 10 MW or a nominal diameter greater than 3.3 m. It is generally not appropriate to fully apply the steps specified in this part to turbines with smaller unit power or diameter, but if agreed upon by both the supplier and the buyer, this part can also be applied to such machinery. In this part, the term "turbine" includes pump-turbines operating as turbines, and the term "pump" includes pump-turbines operating as pumps. Except for matters related to testing, this part does not include matters of purely commercial interest. As long as the structure or components of the machinery do not affect the performance of the model or the relationship between the model and the prototype, this part does not address the detailed structure of the machinery or the mechanical performance of its components.

Development Information

Word Count: 135 Thousand words Pages: 71 pages

Same series standard

GB/T 15613.1-2008 Model acceptance tests of hydraulic turbines,storage pumps and pump-turbines—Part 1:General rules GB/T 15613.3-2008 Model acceptance tests of hydraulic turbines,storage pumps and pump-turbines Part 3:Additional performance test

Superseded by the following standards

GB/T 15613-2023 Hydraulic turbines,storage pumps and pump-turbines model acceptance tests

Referenced Standards

ISO 31-3:1992 ISO 1438-1:1980 ISO 2186:1973 ISO 4185:1980 ISO 4373:1995 ISO 5168:1978 ISO 6817:1992 ISO 7066-1:1997 ISO 7066-2:1988 ISO 8316:1987 ISO 9104:1991 IEC 5167-1:1991 GB/T 15613.1-2008 Model acceptance tests of hydraulic turbines,storage pumps and pump-turbines—Part 1:General rules GB/T 15613.3-2008 Model acceptance tests of hydraulic turbines,storage pumps and pump-turbines Part 3:Additional performance test GB/T 20043-2005 Field acceptance test to determine the hydraulic performance of hydraulic turbine, storage pumps and pump-turbines