GB/T 5195.3-2017 Active National standards

GB/T 5195.3-2017 Fluorspar—Determination of loss in mass at 105 ℃—Gravimetric method

GB/T 5195.3-2017 Fluorspar—Determination of loss in mass at 105 ℃—Gravimetric method

Publish Date: 2017-09-07 Implement Date: 2018-06-01 For services related to genuine standard inquiry, procurement, translation, and other related services in China, please Contact Us

Basic Information

Standard Code: GB/T 5195.3-2017

Standard Type: National standards

Standard Status: Active

is_force_gb: no

CCS Name: Metallurgical auxiliary raw material minerals

ICS Name: Non-metallic minerals

Publish Date: 2017-09-07

Implement Date: 2018-06-01

Pages: 5 pages

Scope

This part of GB/T 5195 specifies the method for determining the amount of moisture loss at 105°C in fluorite by the weight method. This part is applicable to the determination of the amount of moisture loss at 105°C in fluorite. The measurement range (mass fraction): 0.02%~10.00%.

Development Information

Word Count: 10 Thousand words Pages: 5 pages

Same series standard

GB/T 5195.1-2017 Fluorspar—Determination of calcium fluoride content—EDTA titration method and distillation-potentiometric titration method GB/T 5195.5-2017 Fluorspar—Determination of total sulfur content—Pipe furnace combustion iodic acid potassium titration method GB/T 5195.6-2017 Fluorspar—Determination of phosphorus content—Photometric method GB/T 5195.13-2017 Fluorspar—Determination of aluminium content—EDTA titration method GB/T 5195.14-2017 Fluorspar—Determination of magnesium content—Flame atomic absorption spectrometry GB/T 5195.15-2017 Fluorspar—Determination of calcium, aluminum, silicon, phosphorus, sulfur, potassium, iron, barium and lead content—Wavelength dispersive X-ray fluorescence spectrometric method GB/T 5195.16-2017 Fluorspar—Determination of silicon,aluminum,iron,potassium,magnesium and titanium content—Inductively coupled plasma atomic emission spectrometry

Replace the following standards

GB/T 5195.3-2006 Fluorspar—Determination of loss in mass at 105℃—Gravimetric method

Referenced Standards

GB/T 8170-1987 Rules for rounding off of numberical values GB/T 8170-2008 Rules of rounding off for numerical values & expression and judgement of limiting values GB/T 22564-2008 Fluorspar—Sampling and sample preparation

Related Standards

GB/T 5463.1-1985 Replaced

GB/T 5463.1-1985 Non-metallic mineral products—Commonly used terms

Publish Date: 1985-10-12

GB/T 5463.2-1985 Replaced

GB/T 5463.2-1985 Technical terms of non-metallic mineral products—Talc

Publish Date: 1985-10-12

GB/T 5463.3-1986 Replaced

GB/T 5463.3-1986 Technical terms of non-metallic mineral products—Gypsum and anhydrite

Publish Date: 1986-09-01

GB/T 14505-1993 Replaced

GB/T 14505-1993 Method for chemical analysis of rocks and ores—General rules and regulations

Publish Date: 1993-06-19

GB/T 14506.10-1993 Replaced

GB/T 14506.10-1993 Silicate rocks—Determination of manganese oxide

Publish Date: 1993-06-19

GB/T 14506.11-1993 Replaced

GB/T 14506.11-1993 Silicate rocks—Determination of potassium oxide and sodium oxide

Publish Date: 1993-06-19