GB/T 6346.3-2015 Active National standards

GB/T 6346.3-2015 Fixed capacitors for use in electronic equipment—Part 3:Sectional specification—Surface mount fixed tantalum electrolytic capacitors with manganese dioxide solid electrolyte

Publish Date: 2015-07-03 Implement Date: 2016-03-01 For services related to genuine standard inquiry, procurement, translation, and other related services in China, please Contact Us

Basic Information

Standard Code: GB/T 6346.3-2015

Standard Type: National standards

Standard Status: Active

is_force_gb: no

CCS Name: Capacitor

ICS Name: Tantalum electrolytic capacitors

Publish Date: 2015-07-03

Implement Date: 2016-03-01

Pages: 26 pages

Scope

This section applies to surface-mounted solid electrolytic tantalum capacitors. These capacitors are mainly used for direct installation on hybrid circuit boards or printed circuit boards.
They include two types: Type I capacitors with a protective layer and Type II capacitors without a protective layer.

Development Information

Word Count: 44 Thousand words Pages: 26 pages

Same series standard

GB/T 6346.11-2015 Fixed capacitors for use in electronic equipment—Part 11:Sectional specification—Fixed polyethylene-terephthalate film dielectric metal foil d.c.capacitors GB/T 6346.14-2015 Fixed capacitors for use in electronic equipment—Part 14:Sectional specification—Fixed capacitors for electromagnetic interference suppression and connection to the supply mains GB/T 6346.301-2015 Fixed capacitors for use in electronic equipment—Part 3-1:Blank detail specification—Surface mount fixed tantalum electrolytic capacitors with manganese dioxide solid electrolyte—Assessment level EZ GB/T 6346.1101-2015 Fixed capacitors for use in electronic equipment—Part 11-1:Blank detail specification—Fixed polyethylene-terephthalate film dielectric metal foil d.c.capacitors—Assessment level EZ GB/T 6346.1401-2015 Fixed capacitors for use in electronic equipment—Part 14-1: Blank detail specification—Fixed capacitors for electromagnetic interference suppression and connection to the supply mains—Assessment level D

Replace the following standards

GB/T 14121-1993 Fixed capacitors for use in electronic equipment—Part 3:Sectional specification-Fixed tantalum chip capacitors

Referenced Standards

GB/T 321-2005 Preferred numbers—Series of preferred numbers GB/T 2471-1995 Preferred number series for resistors and capacitors GB/T 2693-2001 Fixed capacitors for use in electronic equipment—Part 1:Generic specification IEC 60062 IEC 60068-1 IEC 60410

Adopt standards

IEC 60384-3:2006

Related Standards

GB/T 12794-1991 Active

GB/T 12794-1991 Fixed capacitors for use in electronic equipment—Part 15:Blank detail specification—Tantalum capacitors with non-solid electrolyte and foil electrode—Assessment level E

Publish Date: 1991-04-15

GB/T 12795-1991 Active

GB/T 12795-1991 Fixed capacitors for use in electronic equipment—Part 15:Blank detail specification—Tantalum capacitors with non-solid electrolyte and porous anode—Assessment level E

Publish Date: 1991-04-15

GB/T 14121-1993 Replaced

GB/T 14121-1993 Fixed capacitors for use in electronic equipment—Part 3:Sectional specification-Fixed tantalum chip capacitors

Publish Date: 1993-01-21

GB/T 14122-1993 Replaced

GB/T 14122-1993 Fixed capacitors for use in electronic equipment—Part 3:Blank detail specification:chip capacitors—Assessment level E

Publish Date: 1993-03-18

GB/T 7213-2003 Active

GB/T 7213-2003 Fixed capacitors for use in electronic equipment—Part 15:Sectional specification—Fixed tantalum capacitors with non-solid or solid electrolyte

Publish Date: 2003-11-24

GB/T 7214-2003 Active

GB/T 7214-2003 Fixed capacitors for use in electronic equipment—Part 15-3:Blank detail specification-Fixed tantalum capacitors with solid electrolyte and porous anode-Assessment level E

Publish Date: 2003-11-24