GB/T 17923-1999
Replaced
GB/T 39778-2021
Active
National standards
GB/T 39778-2021 Technical specification for recycling and utilization of copper anode mud
GB/T 39778-2021 Technical specification for recycling and utilization of copper anode mud
Basic Information
Standard Code:
GB/T 39778-2021
Standard Type:
National standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Integrated Environmental Protection
ICS Name:
Liquid waste, sludge
Publish Date:
2021-03-09
Implement Date:
2021-10-01
Pages:
14 pages
Scope
This standard specifies the general requirements for copper anode sludge, the technical requirements for semi-wet recovery and utilization, the technical requirements for fully wet recovery and utilization, and the technical requirements for pyrometallurgical recovery and utilization.
This standard is applicable to the recovery and utilization of copper anode sludge generated during the copper electrolytic refining process in copper smelting enterprises.
Development Information
Referenced Standards
GB/T 1419-1989 Sponge platinum
GB/T 1419-2004 Sponge platinum
GB/T 1419-2015 Sponge platinum
GB 1420-1989 Sponge palladium
GB/T 1420-2004 Sponge palladium
GB/T 1420-2015 Sponge palladium
GB 4134-1994 Gold ingots
GB/T 4134-2003 Gold ingots
GB/T 4134-2015 Gold ingots
GB/T 4134-2021 Gold ingots
GB/T 4135-2002 Silver
GB/T 4135-2016 Silver ingots
YS/T 87-1995 The analysis sampling methods for gold and silver in copper and lead electrolytic anode tarnish
YS/T 87-2009 Methods for sampling and sample preparation of copper anode slime and lead anode slime
YS/T 222-1996 Tellurium ingots
YS/T 222-2010 Tellurium ingots
YS/T 223-1996 Selenium
YS/T 223-2007 Selenium
YS/T 651-2007 Selenium dioxide
YS/T 745.1-2010 Methods for chemical analysis of copper anode slime—Part 1:Determination of copper content—Iodine titration method
YS/T 745.2-2010 Methods for chemical analysis of copper anode slime—Part 2:Determination of gold content and silver content—Fire assay gravimetric method
YS/T 745.2-2016 Methods for chemical analysis of copper anode slime—Part 2:Determination of gold and silver contents—Fire assay gravimetric method
YS/T 745.3-2010 Methods for chemical analysis of copper anode slime—Part 3:Determination of platinum content and palladium content—Fire assay collection-inductively coupled plasma atomic emission spectrometric methods
YS/T 745.4-2010 Methods for chemical analysis of copper anode slime—Part 4:Determination of selenium content—Iodine titration method
YS/T 745.5-2010 Methods for chemical analysis of copper anode slime—Part 5:Determination of tellurium content—Potassium dichromate titration method
YS/T 745.6-2010 Methods for chemical analysis of copper anode slime—Part 6：Determination of lead content—Na2EDTA titration method
YS/T 745.7-2010 Methods for chemical analysis of copper anode slime—Part 7:Determination of bismuth content—Flame atomic absorption spectrophotometry and Na2EDTA titration method
YS/T 1154-2016 Crude Selenium
YS/T 87-2021 YS/T 87-2021 Copper, lead anode tails sampling and preparation methods
YS/T 1226-2018 coarse tellurium
GB 25467-2010 Emission Standard of Pollutants from Cu,Ni,Co Industry
Related Standards
GB 18420.1-2001
Replaced
GB 18420.1-2001 Biological toxicity grading for pollutant from marine petroleum exploration and exploitation
GB/T 18420.2-2001
Replaced
GB/T 18420.2-2001 Biological toxicity inspection method for pollutant from marine petroleum exploration and exploitation
GB 18420.1-2009
Active
GB 18420.1-2009 Biological toxicity for pollutants from marine petroleum exploration and exploitation—Part 1:Grading
GB/T 18420.2-2009
Active
GB/T 18420.2-2009 Biological toxicity for pollutants from marine petroleum exploration and exploitation—Part 2:Test method
YS/T 119.12-2010
Active