GB/T 4213-1992
Replaced
GB/T 17213.4-2015
Active
National standards
GB/T 17213.4-2015 Industrial-process control valves—Part 4:Inspection and routine testing
GB/T 17213.4-2015 Industrial-process control valves—Part 4:Inspection and routine testing
Basic Information
Standard Code:
GB/T 17213.4-2015
Standard Type:
National standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Executor
ICS Name:
Pressure regulator
Publish Date:
2015-12-10
Implement Date:
2016-07-01
Pages:
18 pages
Scope
This part of GB/T 17213 specifies the inspection and routine test requirements for control valves manufactured in accordance with other parts of GB/T 17213.
This part is only applicable to control valves with a pressure rating not exceeding PN420 (Class 2500). The requirements for actuators only apply to pneumatic actuators.
This part is not applicable to various types of control valves used in radioactive working environments, fire-resistance test environments, or other hazardous working environments. If the relevant standards involving hazardous working environments conflict with this part, the latter shall prevail.
Note: Through consultation between the buyer and the manufacturer, this standard can be applied to higher pressure ratings.
Development Information
Same series standard
GB/T 17213.1-2015 Industrial-process control valves—Part 1:Control valve terminology and general considerations
GB/T 17213.8-2015 Industrial-process control valves—Part 8-1:Noise considerations—Laboratory measurement of noise generated by aerodynamic flow through control valves
GB/T 17213.10-2015 Industrial-process control valves—Part 2-4:Flow capacity—Inherent flow characteristics and rangeability
GB/T 17213.16-2015 Industrial-process control valves—Part 8-4:Noise considerations—Prediction of noise generated by hydrodynamic flow
GB/T 17213.18-2015 Industrial-process control valves—Part 9:Test procedure for response measurements from step inputs
Replace the following standards
Referenced Standards
IEC 60534(所有部分)
IEC 61298(所有部分)
Adopt standards
IEC 60534-4:2006
Related Standards
GB/T 17213.5-2008
Active
GB/T 17213.5-2008 Industrial-process control valves—Part 5:Marking
GB/T 17213.17-2010
Active
GB/T 17213.17-2010 Industrial-process control valves—Part 2-5:Flow capacity—Sizing equations for fluid flow through multistage control valves with interstage recovery
JG/T 383-2012
Active
JG/T 383-2012 Self-operating differential pressure control valve
GB/T 17213.10-2015
Active
GB/T 17213.10-2015 Industrial-process control valves—Part 2-4:Flow capacity—Inherent flow characteristics and rangeability
GB/T 17213.1-2015
Active