GB/T 21388-2008 Active National standards

GB/T 21388-2008 Vernier,dial and digital display depth callipers

GB/T 21388-2008 Vernier,dial and digital display depth callipers

Publish Date: 2008-02-02 Implement Date: 2008-07-01 For services related to genuine standard inquiry, procurement, translation, and other related services in China, please Contact Us

Basic Information

Standard Code: GB/T 21388-2008

Standard Type: National standards

Standard Status: Active

is_force_gb: no

CCS Name: Measuring tools and instruments

ICS Name: Measuring instruments and meters

Publish Date: 2008-02-02

Implement Date: 2008-07-01

Pages: 15 pages

Scope

This standard specifies the terms and definitions, forms and basic parameters, requirements, test methods, inspection conditions, inspection methods, marking and packaging of vernier depth calipers, dial depth calipers, and digital display depth calipers. This standard applies to vernier depth calipers, dial depth calipers, and digital display depth calipers (hereinafter referred to as "depth calipers") with a scale division/resolution of 0.01 mm, 0.02 mm, 0.05 mm, and 0.10 mm, and a measuring range of (0~100) mm to (0~1,000) mm.

Development Information

Word Count: 23 Thousand words Pages: 15 pages

Replace the following standards

GB/T 1214.1-1996 The specification for callipers of vernier type GB/T 1214.4-1996 The depth gauge for callipers of vernier type

Referenced Standards

GB/T 2423.3-1993 Basic environmental testing procedures for electric and electronic products—Test Ca:Damp heat, steady state GB/T 2423.22-2002 Environmental testing for electric and electronic products—Part 2:Test methods Test N:Change of temperature GB 4208-1993 Degrees of protection provided by enclosure (IP code) GB/T 17626.2-1998 Electromagnetic compatibility—Testing and measurement techniques—Electrostatic discharge immunity test GB/T 17626.3-1998 Electromagnetic compatibility—Testing and measurement techniques-Radiated, radio-frequency, electromagnetic field immunity test GB/T 17163-1997 Glossary of terms used in dimensional measuring instruments—General terms GB/T 17163-2008 Glossary of terms used in dimensional measuring instruments—General terms GB/T 17163-2022 Glossary of terms for dimensional measuring instruments—General terms GB/T 17164-1997 Glossary of terms used in dimensional measuring instruments—Product terms GB/T 17164-2008 Glossary of terms used in dimensional measuring instruments—Product terms GB/T 17164-2022 Glossary of terms for dimensional measuring instruments—Product terms

Related Standards

GB/T 1957-1981 Replaced

GB/T 1957-1981 Limit gauges for plain workpiece

Publish Date: 1980-12-26

GB/T 1216-1985 Replaced

GB/T 1216-1985 Micrometers

Publish Date: 1985-04-23

GB/T 5106-1985 Replaced

GB/T 5106-1985 Gauges for straight cylindrical involute splines

Publish Date: 1985-04-27

GB/T 6091-1985 Replaced

GB/T 6091-1985 Straight edge

Publish Date: 1985-06-06

GB/T 1217-1986 Replaced

GB/T 1217-1986 Gear tooth micrometers

Publish Date: 1986-04-24

GB/T 13925-1992 Replaced

GB/T 13925-1992 Metallographs for high manganese cast steel

Publish Date: 1992-12-10