GB 3186-1982
Replaced
JG/T 210-2018
Active
Industry standards-The construction industry
JG/T 210-2018 Primer for interior and exterior wall
JG/T 210-2018 Primer for interior and exterior wall
Basic Information
Standard Code:
JG/T 210-2018
Standard Type:
Industry standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Paint
ICS Name:
Paints and varnishes
Publish Date:
2018-11-07
Implement Date:
2019-04-01
Pages:
13 pages
Scope
This standard specifies the classification and marking, requirements, test methods, inspection rules, marking, packaging, and storage of primers for interior and exterior walls of buildings.
This standard applies to all types of primers for interior and exterior walls of buildings, which are mainly made of synthetic resin emulsions and solvent-based resins, and are supplemented with additives, pigments, and fillers.
Development Information
Replace the following standards
Referenced Standards
GB/T 1728-1979
GB/T 1733-1993 Determination of resistance to water of films
GB/T 9268-2008 Determination of freeze-thaw resistance of latex and emulsion paints
GB/T 9271-2008 Paints and varnishes—Standard panels for testing
GB/T 9779-2015 Multi-layer coatings for architecture
GB 175-1999 Portland cement and ordinary Portland cement
GB 175-2007 Common portland cement
GB 175-2023 Common portland cement
GB/T 1766-1995 Paint and varnish—Rating schemes of degradation of coats
GB/T 1766-2008 Paints and varnishes—Rating schemes of degradation of coats
GB/T 1910-1999 Newsprint
GB/T 1910-2006 Newsprint
GB/T 1910-2015 Newsprint
GB 3186-1982 Sampling paint products
GB/T 3186-2006 Paints, varnishes and raw materials for paints and varnishes—Sampling
GB/T 6682-1992 Water for analytical laboratory use—Specification and test methods
GB/T 6682-2008 Water for analytical laboratory use—Specification and test methods
GB/T 6750-2007 Paints and varnishes—Determination of density—Pyknometer method
GB/T 8170-1987 Rules for rounding off of numberical values
GB/T 8170-2008 Rules of rounding off for numerical values & expression and judgement of limiting values
GB/T 9265-1988 Determination of alkali resistance of film of architectural paints and coatings
GB/T 9265-2009 Determination for alkali resistance of film of architectural paints and coatings
GB 9278-1988 Temperatures and humidities for conditioning and testing of paint specimens
GB/T 9278-2008 Temperatures and humidities for conditioning and testing of paint specimens
GB/T 9750-1998 Marks for package of coating products
GB/T 13491-1992 General rule for packing of coatings
GB 18582-2001 Indoor decorating and refurbishing materials—Limit of harmful substances of interior architectural coatings
GB 18582-2008 Indoor decorating and refurbishing materials—Limit of harmful substances of interior architectural coatings
GB 18582-2020 Limit of harmful substances of architectural wall coatings
GB 24408-2009 Limit of harmful substances of exterior wall coatings
HG/T 3001-1999 Iron blue pigments
GB 50325-2001 Code for indoor environmental pollution control of civil building engineering
GB 50325-2010 Code for indoor environmental pollution control of civil building engineering
GB 50325-2020 Standard for indoor environmental pollution control of civil building engineering
JC/T 412.1-2006 Fiber cement flat sheets Part 1:Non-Asbestos Fiber cement flat sheets
GB/T 9750-2025 General rules for packaging,labelling,transport and storage of coating material and pigment products
JGJ 52-2006 Standard for technical requirements and test method of sand and crushed stone (or gravel) for ordinary concrete
Related Standards
GB/T 4653-1984
Active
GB/T 4653-1984 The general technical specifications on infrared radiation paints
GB/T 5206.1-1985
Replaced
GB/T 5206.1-1985 Paints and varnishes—Vocabulary—Part 1:General terms
GB/T 5207-1985
Abolished
GB/T 5207-1985 Coatings—Determination of the danger classification by flash testing (rapid equilibrium method)
GB/T 5208-1985
Replaced
GB/T 5208-1985 Coatings—Flash point test—Rapid equilibrium method
GB/T 5209-1985
Active