GB 3186-1982
Replaced
GB/T 9779-2015
Active
National standards
GB/T 9779-2015 Multi-layer coatings for architecture
GB/T 9779-2015 Multi-layer coatings for architecture
Basic Information
Standard Code:
GB/T 9779-2015
Standard Type:
National standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Decoration materials
ICS Name:
Paints and varnishes
Publish Date:
2015-09-11
Implement Date:
2016-08-01
Pages:
23 pages
Scope
This standard specifies the terms and definitions, classification and marking, requirements, test methods, inspection rules, labeling, packaging, transportation, and storage of multi-layer architectural coatings. This standard applies to multi-layer coatings with three-dimensional or flat decorative effects on the interior and exterior walls of buildings.
Development Information
Replace the following standards
Referenced Standards
GB/T 1728-1979
GB/T 1733-1993 Determination of resistance to water of films
GB/T 1748
GB/T 1865-2009 Paints and varnishes—Artificial weathering and exposure to artificial radiation—Exposure to filtered xenon-arc radiation
GB/T 9271-2008 Paints and varnishes—Standard panels for testing
GB/T 9780-2013 Test method for dirt pickup resistance and stain remvoal of film of architectural coatings and paint
GB/T 16777-2008 Test methods for building waterproofing coatings
GB 175-1999 Portland cement and ordinary Portland cement
GB 175-2007 Common portland cement
GB 175-2023 Common portland cement
GB/T 528-1998 Rubber,vulcanized or thermoplastic—Determination of tensile stress-strain properties
GB/T 528-2009 Rubber,vulcanized or thermoplastic—Determination of tensile stress-strain properties
GB/T 1766-1995 Paint and varnish—Rating schemes of degradation of coats
GB/T 1766-2008 Paints and varnishes—Rating schemes of degradation of coats
GB 3186-1982 Sampling paint products
GB/T 3186-2006 Paints, varnishes and raw materials for paints and varnishes—Sampling
GB/T 6682-1992 Water for analytical laboratory use—Specification and test methods
GB/T 6682-2008 Water for analytical laboratory use—Specification and test methods
GB/T 8170-1987 Rules for rounding off of numberical values
GB/T 8170-2008 Rules of rounding off for numerical values & expression and judgement of limiting values
GB/T 9265-1988 Determination of alkali resistance of film of architectural paints and coatings
GB/T 9265-2009 Determination for alkali resistance of film of architectural paints and coatings
GB/T 9266-1988 Determination of scrub resistance of film of architectural paints and coatings
GB/T 9266-2009 Determination of scrub resistance of film of architectural paints and coatings
GB/T 9750-1998 Marks for package of coating products
GB/T 13491-1992 General rule for packing of coatings
GB/T 17671-1999 Method of testing cements—Determination of strength
GB/T 17671-2021 Test method of cement mortar strength(ISO method)
JG/T 309-2011 Determination and classification of water-vapour transmission rate(permeability) for exterior wall coatings
JG/T 25-1999 Determination for freeze-thaw resistance of film of building coatings
JC/T 412.1-2006 Fiber cement flat sheets Part 1:Non-Asbestos Fiber cement flat sheets
GB/T 9750-2025 General rules for packaging,labelling,transport and storage of coating material and pigment products
Related Standards
GB/T 4653-1984
Active
GB/T 4653-1984 The general technical specifications on infrared radiation paints
GB/T 5206.1-1985
Replaced
GB/T 5206.1-1985 Paints and varnishes—Vocabulary—Part 1:General terms
GB/T 5207-1985
Abolished
GB/T 5207-1985 Coatings—Determination of the danger classification by flash testing (rapid equilibrium method)
GB/T 5208-1985
Replaced
GB/T 5208-1985 Coatings—Flash point test—Rapid equilibrium method
GB/T 5209-1985
Active