GB/T 25121-2010 Replaced National standards

GB/T 25121-2010 Railway applications—Rolling stock equipment—Capacitors for power electronics

GB/T 25121-2010 Railway applications—Rolling stock equipment—Capacitors for power electronics

Publish Date: 2010-09-02 Implement Date: 2011-02-01 For services related to genuine standard inquiry, procurement, translation, and other related services in China, please Contact Us

Basic Information

Standard Code: GB/T 25121-2010
Standard Type: National standards
Standard Status: Replaced
is_force_gb: no
CCS Name: Traction electrical equipment
ICS Name: Electric traction equipment
Publish Date: 2010-09-02
Implement Date: 2011-02-01
Pages: 34 pages

Scope

This standard applies to power electronic capacitors used in rail transit locomotives and vehicles.
The rated voltage of the capacitors covered by this standard is up to 10,000 V.
The operating frequency of such capacitor systems is typically lower than 2,500 Hz, while the pulse frequency can reach several thousand Hz, and in some cases may exceed 10,000 Hz.
Capacitors are divided into AC capacitors and DC capacitors.
Capacitors are installed as components in housings.
Note: This standard applies to a wide range of capacitor technologies, including those used in overvoltage protection, DC and AC filters, switching circuits, DC energy storage, auxiliary converters, and many other applications.
This standard does not apply to the following capacitors:
——Capacitors for induction heating devices with a frequency of 40 Hz to 24,000 Hz (see GB/T 3984.1 and GB/T 3984.2);
——Capacitors used in AC motors and similar applications (see GB/T 3667.1);
——Capacitors used in circuits for suppressing one or more harmonics in power supply networks;
——Small AC capacitors for fluorescent lamps and discharge lamps (see GB 18489 or GB/T 18504);
——Capacitors for suppressing electromagnetic interference (see GB/T 14472);
——Parallel capacitors for AC power systems with a rated voltage of over 1,000 V (see GB/T 11024.1, GB/T 11024.2);
——Self-healing parallel power capacitors for AC power systems with a rated voltage of 1,000 V and below (see GB/T 12747.1, GB/T 12747.2);
——Non-self-healing parallel power capacitors for AC power systems with a rated voltage of 1,000 V and below (see GB/T 17886.1, GB/T 17886.2, and GB/T 17886.3);
——Electronic capacitors not used in main circuits;
——Series capacitors for power systems (see GB/T 6115.1, GB/T 6115.2, and GB/T 6115.3);
——Coupling capacitors and capacitive dividers (see GB/T 19749);
——Capacitors used in applications requiring energy storage/lar

Development Information

Word Count: 60 Thousand words Pages: 34 pages

Superseded by the following standards

Referenced Standards

GB/T 2423.22-2002 Environmental testing for electric and electronic products—Part 2:Test methods Test N:Change of temperature IEC 60068-2-21:1992 GB/T 2423.3-1993 Basic environmental testing procedures for electric and electronic products—Test Ca:Damp heat, steady state GB/T 2423.3-2006 Environmental testing for electric and electronic products—Part 2:Testing method—Test Cab:Damp heat, steady state GB/T 2423.3-2016 Environmental testing—Part 2:Testing method—Test Cab:Damp heat,steady state GB/T 2423.28-2005 Environmental testing for electric and electronic products—Part 2:Test methods—Test T:Soldering GB/T 4798.5-1987 Enviromental conditions existing in the application of electric and electronic products—Ground vehicle installations GB/T 4798.5-2007 Environmental conditions existing in the application of electric and electronic products—Section 5:Ground vehicle installations GB 13539.1-2002 Low-voltage fuses—Part 1:General requirements GB 13539.1-2008 Low-voltage fuses—Part 1:General requirements GB/T 13539.1-2015 Low-voltage fuses—Part 1:General requirements GB/T 16935.1-1997 Insulation coordination for equipment within low-voltage systems—Part 1:Principles,requirements and tests GB/T 16935.1-2008 Insulation coordination for equipment within low-voltage systems—Part 1:Principles,requirements and tests GB/T 16935.1-2023 Insulation coordination for equipment within low-voltage supply systems—Part 1:Principles, requirements and tests GB/T 21563-2008 Railway applications—Rolling stock equipment—Shock and vibration tests GB/T 21563-2018 Railway applications—Rolling stock equipment—Shock and vibration tests

Adopt standards

IEC 61881:1999

Related Standards

Contact Us