YY 0154-2013 Abolished Industry standards-Medicine

YY 0154-2013 Spring full lift safety valves on pressure steam sterilizer

YY 0154-2013 Spring full lift safety valves on pressure steam sterilizer

Publish Date: 2013-10-21 Implement Date: 2014-10-01 For services related to genuine standard inquiry, procurement, translation, and other related services in China, please Contact Us

Basic Information

Standard Code: YY 0154-2013

Standard Type: Industry standards

Standard Status: Abolished

is_force_gb: no

CCS Name: Public medical equipment

ICS Name: Other standards related to disinfection and sterilization

Publish Date: 2013-10-21

Implement Date: 2014-10-01

Pages: 11 pages

Scope

This standard specifies the terms and definitions, classification and marking, requirements, test methods, inspection rules, marking and user manuals, and packaging, transportation, storage, and supply of spring fully-opening safety valves for pressure steam sterilization equipment.
This standard applies to spring fully-opening safety valves for pressure steam sterilization equipment with a set pressure not exceeding 0.4 MPa and a nominal diameter greater than or equal to 8 mm (hereinafter referred to as "safety valves"). These safety valves are intended for use in pressure steam sterilization equipment with a design pressure not exceeding 0.4 MPa and a sterilization temperature in the range of 115 °C to 150 °C.

Development Information

Word Count: 20 Thousand words Pages: 11 pages

Replace the following standards

YY 0154-2005 Spring type safety valve on pressure steam sterilizer

Referenced Standards

GB/T 12241-2005 Safety valves—General requirements GB/T 12242-2005 Performance test code—Pressure relief devices GB/T 12243-2005 Spring loaded safety valves GB/T 9969-2008 General principles for preparation of instructions for use of industrial products GB 9969.1-1998 General principles for preparation of instructions for use of industrial products GB/T 12220-1989 General purpose industrial valves—Marking GB/T 12220-2015 Industrial valves—Marking JB/T 7928-2014 Industrial Valve Supply Requirements JB/T 7928-1999 JBT 7928-1999 General valve Supply requirements JB/T 308-2004 Valves model designation method TSG ZF001-2006 Safety Technical Supervision Regulations for Safety Valves

Related Standards

YY 0154-2005 Replaced

YY 0154-2005 Spring type safety valve on pressure steam sterilizer

Publish Date: 2005-04-05

YY/T 0157-2005 Replaced

YY/T 0157-2005 Spring type release on pressure steam sterilizer

Publish Date: 2005-04-05

YY/T 0158-2005 Replaced

YY/T 0158-2005 Spring type gasket on pressure steam sterilizer

Publish Date: 2005-04-05

YY/T 0159-2005 Abolished

YY/T 0159-2005 Steam trap fitted on pressure steam sterilizer

Publish Date: 2005-04-05

GB/T 19971-2005 Replaced

GB/T 19971-2005 Sterilization of health care products—Vocabulary

Publish Date: 2005-11-04

GB/T 19972-2005 Replaced

GB/T 19972-2005 Sterilization of health care products—Biological indicators—Guidance for the selection, use and interpretation of results

Publish Date: 2005-11-04