YY/T 0158-2005 Replaced Industry standards-Medicine

YY/T 0158-2005 Spring type gasket on pressure steam sterilizer

YY/T 0158-2005 Spring type gasket on pressure steam sterilizer

Publish Date: 2005-04-05 Implement Date: 2006-01-01 For services related to genuine standard inquiry, procurement, translation, and other related services in China, please Contact Us

Basic Information

Standard Code: YY/T 0158-2005

Standard Type: Industry standards

Standard Status: Replaced

is_force_gb: no

CCS Name: Public medical equipment

ICS Name: Other standards related to disinfection and sterilization

Publish Date: 2005-04-05

Implement Date: 2006-01-01

Pages: 5 pages

Scope

This standard specifies the classification and marking, requirements, test methods, inspection rules, and marking of sealing gaskets (hereinafter referred to as sealing gaskets) used in pressure steam sterilization equipment, as well as the user's manual, packaging, transportation, and storage thereof. This standard applies to sealing gaskets used in pressure steam sterilization equipment.

Development Information

Word Count: 7 Thousand words Pages: 5 pages

Replace the following standards

YY/T 0158-1994 Sealing gasket used in pressure steam sterilization equipment

Superseded by the following standards

YY/T 0158-2013 Gasket ring on pressure steam sterilizer

Referenced Standards

GB/T 528-1998 Rubber,vulcanized or thermoplastic—Determination of tensile stress-strain properties GB/T 528-2009 Rubber,vulcanized or thermoplastic—Determination of tensile stress-strain properties GB/T 531-1999 Rubber—Determination of indentation hardness by means of pocket hardness meters GB/T 531.1-2008 Rubber,vulcanized or thermoplastic—Determination of indentation hardness—Part 1:Duromerer method(Shore hardness) GB/T 531.2-2009 Rubber,vulcanized or thermoplastic—Determination of indentation hardness—Part 2:IRHD pocket meter method GB/T 2828.1-2003 Sampling procedures for inspection by attributes—Part 1:Sampling schemes indexed by acceptance quality limit(AQL) for lot-by-lot inspection GB/T 2828.1-2012 Sampling procedures for inspection by attributes—Part 1:Sampling schemes indexed by acceptance quality limit(AQL) for lot-by-lot inspection GB/T 2829-2002 Sampling procedures and tables for periodic inspection by attributes (Apply to inspection of process stability) GB/T 3512-2001 Rubber, vulcanized or thermoplastic—Accelerated ageing and heat resistance tests—Air-oven method GB/T 3512-2014 Rubber, vulcanized or thermoplastic—Accelerated ageing and heat resistance tests—Air-oven method GB 9969.1-1998 General principles for preparation of instructions for use of industrial products HG/T 2198-2011 The general requirements for physical testing methods of vulcanized rubber HG/T 2198-1991 The general requirements for physical testing methods of vulcanized rubber GB/T 2829-2025 Sampling procedures and tables for periodic inspection by attributes(Apply to inspection of process stability)

Related Standards

YY 0154-2005 Replaced

YY 0154-2005 Spring type safety valve on pressure steam sterilizer

Publish Date: 2005-04-05

YY/T 0157-2005 Replaced

YY/T 0157-2005 Spring type release on pressure steam sterilizer

Publish Date: 2005-04-05

YY/T 0159-2005 Abolished

YY/T 0159-2005 Steam trap fitted on pressure steam sterilizer

Publish Date: 2005-04-05

GB/T 19971-2005 Replaced

GB/T 19971-2005 Sterilization of health care products—Vocabulary

Publish Date: 2005-11-04

GB/T 19972-2005 Replaced

GB/T 19972-2005 Sterilization of health care products—Biological indicators—Guidance for the selection, use and interpretation of results

Publish Date: 2005-11-04

GB/T 19974-2005 Replaced

GB/T 19974-2005 Sterilization of health care products—General requirement for characterization of a sterilization agent and the development, validation and routine control of a sterilization process for medical devices

Publish Date: 2005-11-04