GB/T 20042.1-2005
Replaced
GB/T 27748.2-2013
Replaced
National standards
GB/T 27748.2-2013 Stationary fuel cell power systems—Part 2:Performance test methods
GB/T 27748.2-2013 Stationary fuel cell power systems—Part 2:Performance test methods
Basic Information
Standard Code:
GB/T 27748.2-2013
Standard Type:
National standards
Standard Status:
Replaced
is_force_gb:
no
CCS Name:
Chemical power sources
ICS Name:
Fuel cell
Publish Date:
2013-11-12
Implement Date:
2014-03-07
Pages:
69 pages
Scope
This part of GB/T 27748 specifies the operating performance and environmental impact of fixed fuel cell power generation systems (hereinafter referred to as power generation systems).
This part applies to the following test methods:
—— Power output under specified operating conditions and transient operating conditions;
—— Power generation efficiency and thermal efficiency under specified operating conditions;
—— Environmental characteristics: for example, gas emissions and noise under specified operating conditions and transient operating conditions;
—— This standard does not provide electromagnetic compatibility (EMC) tests.
This part does not apply to small fixed polymer fuel cell power generation systems with an output electric power of less than 10 kW. IEC 622823201, which has not yet been issued, applies to this type of system.
Due to the different types and applications of fuel cells, as well as the different forms of input and output fluids and energy, power generation systems can have different subsystems. However, to evaluate the power generation system, this part defines a general system schematic and boundaries (see Figure 1). To determine the test boundaries of the power generation system, the following conditions are considered:
—— All energy recovery systems are included within the test boundaries;
—— Any type of electrical energy storage device is considered to be outside the test boundaries;
—— [ZK] The calorific value of input fuels (such as natural gas, propane gas, pure hydrogen gas, etc.) is calculated based on their state at the boundary of the power generation system.
Development Information
Superseded by the following standards
Referenced Standards
IEC 60051(所有部分)
IEC 60359
IEC 60688
IEC 61000-4-7
IEC 61000-4-13
IEC 61028
IEC 61143(所有部分)
IEC 61672-1
IEC 61672-2
IEC 62052-11
IEC 62053-22
ISO/IEC指南98-3
ISO 3648
ISO 3744
ISO 4677-1
ISO 4677-2
ISO 5167(所有部分)
ISO 5348
ISO 6060
ISO 6326(所有部分)
ISO 6974(所有部分)
ISO 6975(所有部分)
ISO 7934
ISO 7935
ISO 8217
ISO 9000
ISO 9096
ISO 10101(所有部分)
ISO 10396
ISO 10523
ISO 10707
ISO 10780
ISO 10849
ISO 11042-1
ISO 11042-2
ISO 11541
ISO 11564
ISO 14687
ISO 15916
ISO 16622
ASTM D4809-00
ASTM F2602-08e1
ASME PTC50
Adopt standards
IEC 62282-3-200:2011
Related Standards
GB/T 20042.2-2008
Replaced
GB/T 20042.2-2008 Proton exchange membrane fuel cell—General technical specification of fuel cell stacks
GB/Z 21742-2008
Active
GB/Z 21742-2008 Portable proton exchange membrane fuel cell power systems
GB/Z 21743-2008
Abolished
GB/Z 21743-2008 Stationary proton exchange membrane fuel cell power system (separate)—Tests methods for the performance
GB/T 20042.3-2009
Replaced
GB/T 20042.3-2009 Proton exchange membrane fuel cell—Part 3:Test method for proton exchange membrane
GB/T 20042.4-2009
Replaced