GB/T 13663-2000
Replaced
GB/T 19812.6-2022
Active
National standards
GB/T 19812.6-2022 Plastic equipment for water saving irrigation—Part 6:Polyethylene (PE) pipes for water supply
GB/T 19812.6-2022 Plastic equipment for water saving irrigation—Part 6:Polyethylene (PE) pipes for water supply
Basic Information
Standard Code:
GB/T 19812.6-2022
Standard Type:
National standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Plastic profiles
ICS Name:
Plastic pipes, fittings, and valves
Publish Date:
2022-07-11
Implement Date:
2023-02-01
Pages:
20 pages
Scope
This document specifies the materials, requirements, test methods, inspection rules, marking, packaging, transportation, and storage of polyethylene (PE) pipes for plastic water-saving irrigation and water conveyance (hereinafter referred to as pipes). This document is applicable to polyethylene pipes for irrigation and water conveyance with a water temperature not exceeding 45 °C, a maximum operating pressure (MOP) not exceeding 1.0 MPa, and a pressure-bearing usage time generally not exceeding 1,500 hours per year. For irrigation and water conveyance pipes that are continuously subjected to internal pressure for a long time, GB/T 13663.2 applies. Note: The reference working temperature is 20 °C. The impact of water temperature on the maximum allowable operating pressure of pipes is described in Appendix C.
Development Information
Referenced Standards
GB/T 6111-2018 Thermoplastics piping systems for the conveyance of fluids—Determination of the resistance to internal pressure
GB/T 8804.3-2003 Thermoplastic pipes—Determination of tensile properties—Part 3:Polyolefin pipes
GB/T 19278-2018 General terms and their definitions of thermoplastic pipes,fittings and valves
GB/T 1040.2-2006 Plastics—Determination of tensile properties—Part 2:Test conditions for moulding and extrusion plastics
GB/T 1040.2-2022 Plastics—Determination of tensile properties—Part 2:Test conditions for moulding and extrusion plastics
GB/T 2828.1-2003 Sampling procedures for inspection by attributes—Part 1:Sampling schemes indexed by acceptance quality limit(AQL) for lot-by-lot inspection
GB/T 2828.1-2012 Sampling procedures for inspection by attributes—Part 1:Sampling schemes indexed by acceptance quality limit(AQL) for lot-by-lot inspection
GB/T 2918-1998 Plastics—Standard atmospheres for conditioning and testing
GB/T 2918-2018 Plastics—Standard atmospheres for conditioning and testing
GB/T 3682.1-2018 Plastics—Determination of the melt mass-flow rate(MFR)and melt volume-flow rate(MVR)of thermoplastics—Part 1:Standard method
GB/T 6671-2001 Thermoplastics pipes-Determination of longitudinal reversion
GB/T 8806-2008 Plastics piping systems—Plastics components—Determination of dimensions
GB/T 9345.1-2008 Plastics—Determination of ash—Part 1:General methods
GB/T 13021-1991 Determination for the carbon black content of polyethylene pipes and fittings by calcination and pyrolysis
GB/T 13021-2023 Polyolefin pipes and fittings—Determination of carbon black content—Test method of alcination and pyrolysis
GB/T 18251-2000 Method for the assessment of pigment or carbon black dispersion in polyolefin pipes,fittings and compounds
GB/T 18251-2019 Method for the assessment of the degree of pigment or carbon black dispersion in polyolefin pipes,fittings and compounds
GB/T 19466.6-2009 Plastics—Differential scanning calorimetry(DSC)—Part 6:Determination of oxidation induction time(isothermal OIT)and oxidation induction temperature(dynamic OIT)
GB/T 8806-1988 Method for dimension measuring of plastic pipes
Adopt standards
ISO 8779:2020
Related Standards
GB/T 18251-2000
Replaced
GB/T 18251-2000 Method for the assessment of pigment or carbon black dispersion in polyolefin pipes,fittings and compounds
GB/T 18252-2000
Replaced
GB/T 18252-2000 Plastics piping and ducting systems—Determination of the long-term hydrostatic strength of thermoplastics materials in pipe form by extrapolation
GB/T 18477-2001
Replaced
GB/T 18477-2001 Unplasticized polyvinyl chloride(PVC-U) double wall corrugated pipes for underground soil, waste and drainage
GB/T 18742.1-2002
Replaced
GB/T 18742.1-2002 Polypropylene piping systems for hot and cold water installations—Part 1:General
GB/T 18742.2-2002
Replaced