GB 1251.1-1989
Replaced
DB31/T 329.9-2018
Active
Shanghai CityLocal standards
DB31/T 329.9-2018 Security system requirements for critical facilities—Part 9:Retail and commercial entities
DB31/T 329.9-2018 Security system requirements for critical facilities—Part 9:Retail and commercial entities
Basic Information
Standard Code:
DB31/T 329.9-2018
Standard Type:
Local standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Social public safety
ICS Name:
Alarm and warning systems
Publish Date:
2018-11-07
Implement Date:
2018-12-01
Pages:
20 pages
Scope
This part of DB31/T 329 stipulates the requirements for the design and construction, review, inspection, acceptance, and maintenance of retail commercial security systems in Shanghai City.
This part applies to supermarkets, warehouse membership stores, shopping centers, department stores, commodity trading markets, precious goods stores (showcases), convenience stores, fueling and charging stations, and other units within the administrative area of Shanghai City.
The renovation and expansion of existing retail commercial security systems shall be carried out in accordance with this part, and other types of commercial security systems, such as street-side shops, shall be implemented with reference to this part.
Development Information
Same series standard
DB31/T 329.2-2018 Security system requirements for critical facilities—Part 2:Centralized storage places for hazardous chemical and radioisotope
DB31/T 329.5-2018 Security technical prevention system requirements for key units and important parts Part 5: Power facilities
DB31/T 329.10-2018 Part 10: Safety technical prevention system requirements for key units and important parts of Party and Government organs
DB31/T 329.22-2018 Part 22: Safety technical prevention system requirements for key units and important parts of military units
Replace the following standards
Referenced Standards
GB 10408.1-2000 Detectors for intruder alarm systems Part 1:Requirements for detectors—General
GB 10408.3-2000 Detectors for intruder alarm systems Part 3:Microwave Doppler detectors for use in buildings
GB 10408.4-2000 Detectors for intruder alarm systems—Part 4:Active infrared intrusion detectors
GB 10408.5-2000 Detectors for intruder alarm systems—Part 5:Passive infra-red detectors for use in buildings
GB 10408.6-1991 Combination microwave and passive infrared intrusion detector
GB 10408.6-2009 Combined passive infrared and microwave detector
GB/T 10408.8-1997 Vibration intrusion detectors
GB/T 10408.8-2008 Vibration intrusion detector
GB 10409-2001 Burglary resistant safes
GB 12663-2001 General specifications for burglar-alarm control units
GB 12663-2019 Intrusion and hold-up alarm systems—Control and indicating equipment
GB 14287.4-2014 Electrical fire monitoring system—Part 4:Arcing fault detectors
GB 15209-1994 Magnetic switch intrusion detectors
GB 15209-2006 Magnetic switch intrusion detectors
GB/T 15408-1994 Alarm system power units, test methods and performance criteria
GB/T 15408-2011 Technical requirement of power-supply for security & protection system
GB 16796-1997 Safety requirements and test methods for security alarm equipment
GB 16796-2009 Safety requirements and test methods for security alarm equipment
GB 16796-2022 Security alarm equipment—Safety requirements and test methods
GB 17565-2007 General specification burglary resistant safety door
GB 20815-2006 Digital video record equipment of video surveillance system in security and protection systems
GB/T 22239-2015
GB/T 28181-2011 Security and protection video monitoring network system technical specification for information transport, switch and control
GB/T 28181-2016 Technical requirements for information transport,switch and control in video surveillance network system for public security
GB/T 28181-2022 Technical requirements for information transmission,switch and control in video surveillance networking system for public security
GB/T 30147-2013 Technical requirements for real time intelligent video analysis devices in surveillance system
GB/T 32581-2016 Specifications for intrusion and hold-up alarm systems
GB 50348-2018 Technical standard for security engineering
GA/T 75-1994 Security precautions engineering procedures and requirements
GA 308-2001 Acceptance rules for security prevention system
GA/T 367-2001 Technical requirements for video security monitoring system
GA/T 394-2002 Entry/exit control system technical requirements GA/T 394-2002
GA/T 644-2006 Specifications for electronic patrol system
GA/T 669.1-2008 Technical standard of city area monitoring and alarming network system—Part 1:General specification
GA/T 751-2024 Specifications for video and image screen display information superposition for public security
GA/T 761-2008 Technical specification of parking lots security management system
GA/T 761-2024 Technical specifications for security management system in parking lots
GA 844-2009 General specifications of forced entry resistant glass
GA 858-2010 Security requirements for bank vaults
GA/T 992-2012 Technical requirements for access control devices in parking lots
GA/T 1127-2013 General technical requirements for cameras used in security video surveillance
GA/T 1211-2014 Technical requirements for high definition video surveillance system in security use
DB31/T 1086
GB 50198-2011 Technical code for project of civil closed circuit monitoring television system
GB 50394-2007 Code of design for intrusion alarm systems engineering
GB 50395-2007 Code of design for video monitoring system
GB 50396-2007 Code of design for access control systems engineering
Related Standards
GB/T 12800-1991
Active
GB/T 12800-1991 Acoustics—Audible emergency evacuation signal
GB/T 12787-1991
Replaced
GB/T 12787-1991 Warning equipment for criticality accidents
GB/T 14918-1994
Active
GB/T 14918-1994 General specification of signal pistol
GB 15207-1994
Abolished
GB 15207-1994 Video motion detector
GB 15209-1994
Replaced