GB/T 13659-2008 Active National standards

GB/T 13659-2008 001×7 Strong acid polystyrene cation exchange resin

GB/T 13659-2008 001×7 Strong acid polystyrene cation exchange resin

Publish Date: 2008-06-30 Implement Date: 2009-02-01 For services related to genuine standard inquiry, procurement, translation, and other related services in China, please Contact Us

Basic Information

Standard Code: GB/T 13659-2008

Standard Type: National standards

Standard Status: Active

is_force_gb: no

CCS Name: Synthetic resins and plastics

ICS Name: Plastic Composite

Publish Date: 2008-06-30

Implement Date: 2009-02-01

Pages: 6 pages

Scope

This standard specifies the technical requirements, test methods, inspection rules, and marking, packaging, transportation, and storage requirements for 001×7 strong acidic styrene-based cation exchange resins. This standard applies to 001×7 strong acidic styrene-based cation exchange resins containing sulfonic acid groups.

Development Information

Word Count: 9 Thousand words Pages: 6 pages

Replace the following standards

GB/T 13659-1992 001×7 Strongly acidic styrene type cation exchange resins

Referenced Standards

GB/T 1631-2008 Designation system and basis for specifications of ion exchange resins GB/T 5475-1985 Methods for sampling ion exchange resins GB/T 5475-2013 Methods for samping ion exchange resins GB/T 5476-1996 Methods for pretreating ion exchange resins GB/T 5476-2013 Methods of pretreating ion exchange resins GB/T 5757-1986 Determination for water retention capacity of ion exchange resins GB/T 5757-2008 Determination of moisture holding capacity of ion exchange resins GB/T 5758-2001 Determination for particle size range,effective size and uniformity coefficient of ion exchange resins GB/T 5758-2023 Determination for particle size,effective size and uniformity coefficient of ion exchange resins GB/T 8330-1987 Method for the determination of true density of ion exchange resins in wet state GB/T 8330-2008 Determination of specific gravity of ion exchange resins in wet state GB/T 8331-1987 Method for the determination of bulk density of ion exchange resins in wet state GB/T 8331-2008 Determination of bulk density of ion exchange resins in wet state GB/T 8144-2008 Determination of exchange capacity of cation exchange resin GB/T 12598-2001 Determination for sphericity of ion exchange resins after attrition or osmotic-attrition GB/T 12598-2023 Plastics—Ion exchange resin—Determination for the rate of sphericity after osmotic-attrition and attrition

Related Standards

GB/T 12000-1989 Replaced

GB/T 12000-1989 Plastics—Test methods of exposure to damp heat, steady state

Publish Date: 1989-12-25

GB/T 15585-1995 Abolished

GB/T 15585-1995 Determination of shrinkage for injection moulding thermoplastics

Publish Date: 1995-06-12

GB/T 15596-1995 Replaced

GB/T 15596-1995 Plastics—Determination of changes in Color and variations in properties after exposure to daylight under glass, natural weathering or artificial light

Publish Date: 1995-06-12

GB/T 15598-1995 abolished_transferred

GB/T 15598-1995 Testing methods for shear strength of plastics by punch tool

Publish Date: 1995-06-12

GB/T 1843-1996 Replaced

GB/T 1843-1996 Plastics—Determination of izod impact strength

Publish Date: 1996-06-14

GB/T 2035-1996 Replaced

GB/T 2035-1996 Terms and definitions for plastics

Publish Date: 1996-06-14