GB/T 10944.4-2013 Active National standards

GB/T 10944.4-2013 Tool shanks with 7/24 taper for automatic tool changers—Part 4:Technical specifications for shanks

Publish Date: 2013-12-31 Implement Date: 2014-10-01 For services related to genuine standard inquiry, procurement, translation, and other related services in China, please Contact Us

Basic Information

Standard Code: GB/T 10944.4-2013

Standard Type: National standards

Standard Status: Active

is_force_gb: no

CCS Name: Knives

ICS Name: Cutting tools comprehensive

Publish Date: 2013-12-31

Implement Date: 2014-10-01

Pages: 4 pages

Scope

This part of GB/T 10944 specifies the basic requirements for the cone angle tolerance and inspection, processability, appearance, surface roughness, materials and hardness, marking, and packaging of handles of type A, AD, AF, U, UD, UF, J, JD, and JF for automatic tool change 7:24 conical tool handles.
This part is applicable to automatic tool change 7:24 conical tool handles produced in accordance with GB/T 10944.1 and GB/T 10944.2.

Development Information

Word Count: 4 Thousand words Pages: 4 pages

Same series standard

GB/T 10944.1-2013 Tool shanks with 7/24 taper for automatic tool changers—Part 1:Dimensions and designation of shanks of forms A,AD,AF,U,UD and UF GB/T 10944.2-2013 Tool shanks with 7/24 taper for automatic tool changers—Part 2:Dimensions and designation of shanks of forms J,JD and JF GB/T 10944.3-2013 Tool shanks with 7/24 taper for automatic tool changers—Part 3:Retention knobs for shanks of forms AC,AD,AF,UC,UD,UF,JD and JF GB/T 10944.5-2013 Tool shanks with 7∶24 taper for automatic tool changers—Part 5:Technical specifications of Retention knobs

Replace the following standards

GB/T 10944.2-2006 Tool shanks with 7∶24 taper for automatic tool changers—Shanks Nos.40,45 and 50—Part 2:Technical specifications

Referenced Standards

GB/T 11852-2003 Tolerances and specification of taper gauges GB/T 10944.1-2006 Tool shanks with 7∶24 taper for automatic tool changers—Shanks Nos.40,45 and 50—Part 1:Dimensions and conicity tolerances GB/T 10944.1-2013 Tool shanks with 7/24 taper for automatic tool changers—Part 1:Dimensions and designation of shanks of forms A,AD,AF,U,UD and UF GB/T 10944.2-2006 Tool shanks with 7∶24 taper for automatic tool changers—Shanks Nos.40,45 and 50—Part 2:Technical specifications GB/T 10944.2-2013 Tool shanks with 7/24 taper for automatic tool changers—Part 2:Dimensions and designation of shanks of forms J,JD and JF

Related Standards

GB/T 2075-1998 Replaced

GB/T 2075-1998 Application of hard cutting materials for machining by chip removal—Designation of the main groups of chip removal and groups of application

Publish Date: 1998-02-27

GB/T 17983-2000 Active

GB/T 17983-2000 Classification and designation of approximate chip control zones for indexable inserts with chipbreakers

Publish Date: 2000-02-18

GB/T 1442-2004 Active

GB/T 1442-2004 Driving tenons and sockets for parallel shank tools—Dimensions

Publish Date: 2004-02-10

GB/T 2075-2007 Replaced

GB/T 2075-2007 Classification and application of hard cutting materials for metal removal with defined cutting edges—Designation of the main groups and groups of application

Publish Date: 2007-07-26

GB/T 15306.1-2008 Active

GB/T 15306.1-2008 Indexable inserts for cutting tools—Ceramic inserts with rounded corners—Part 1:Dimensions of inserts without fixing hole(Class G)

Publish Date: 2008-06-03

GB/T 15306.2-2008 Active

GB/T 15306.2-2008 Indexable inserts for cutting tools—Ceramic inserts with rounded corners—Part 2:Dimensions of inserts with cylindrical fixing hole

Publish Date: 2008-06-03