GB/T 13807.3-2008 Active National standards

GB/T 13807.3-2008 Connections with waisted stud—Nuts,extension sleeves

GB/T 13807.3-2008 Connections with waisted stud—Nuts,extension sleeves

Publish Date: 2008-08-25 Implement Date: 2009-02-01 For services related to genuine standard inquiry, procurement, translation, and other related services in China, please Contact Us

Basic Information

Standard Code: GB/T 13807.3-2008

Standard Type: National standards

Standard Status: Active

is_force_gb: no

CCS Name: Fasteners

ICS Name: Bolts, screws, and studs

Publish Date: 2008-08-25

Implement Date: 2009-02-01

Pages: 7 pages

Scope

This part specifies hexagonal nuts with thread sizes of M12 to M180 × 6, cover nuts with thread sizes of M12 to M120 × 6, and force-bearing sleeves with diameters of dw=21 mm to 270 mm. This part is applicable to fasteners that can withstand high temperatures and alternating loads, and at the same time, maintain a considerable degree of pre-tension force and fatigue resistance under working conditions.

Development Information

Word Count: 12 Thousand words Pages: 7 pages

Same series standard

GB/T 13807.1-2008 Connections with waisted stud—Tape classification GB/T 13807.2-2008 Connections with waisted stud—Studs

Replace the following standards

GB/T 13807.3-1992 Connections with waisted stud—Nuts, extension sleeves

Referenced Standards

GB/T 90.1-2002 Fasteners—Acceptance inspection GB/T 90.1-2023 Fasteners—Acceptance inspection GB/T 90.2-2002 Fasteners—Marking and packaging GB/T 1237-2000 Designation system for fasteners GB/T 3098.8-1992 Mechanical properties of fasteners—Components for bolted connections made mainly from materials with a high temperature strength GB/T 3098.8-2010 Mechanical properties of fasteners Parts for bolted connections for use at temperatures from -200 ℃～+700 ℃ GB/T 3103.4-1992 Tolerances for fasteners—Components for bolted connections made mainly from materials with a high temperature strength GB/T 3103.4-2014 Tolerances for fasteners—Bolt/nut assemblies for service temperatures from -200 ℃～＋700 ℃

Adopt standards

DIN 2510-5:1971 DIN 2510-6:1971 DIN 2510-7:1971

Related Standards

GB/T 3750.3-1983 Replaced

GB/T 3750.3-1983 Hollow screws

Publish Date: 1983-06-17

GB/T 5277-1985 Active

GB/T 5277-1985 Fasteners—Clearance holes for bolts and screws

Publish Date: 1985-08-01

GB/T 6560-1986 Replaced

GB/T 6560-1986 Cross recessed pan head thread forming screws

Publish Date: 1986-07-02

GB/T 6561-1986 Replaced

GB/T 6561-1986 Cross recessed countersunk head thread forming screws

Publish Date: 1986-07-02

GB/T 6562-1986 Replaced

GB/T 6562-1986 Cross recessed raised countersunk head thread forming screws

Publish Date: 1986-07-02

GB/T 6563-1986 Replaced

GB/T 6563-1986 Hexagon head thread forming screws

Publish Date: 1986-07-02