GB 3186-1982
Replaced
GB/T 22374-2008
Replaced
National standards
GB/T 22374-2008 Floor coatings
GB/T 22374-2008 Floor coatings
Basic Information
Standard Code:
GB/T 22374-2008
Standard Type:
National standards
Standard Status:
Replaced
is_force_gb:
no
CCS Name:
Decoration materials
ICS Name:
Paints and varnishes
Publish Date:
2008-09-18
Implement Date:
2009-05-01
Pages:
14 pages
Scope
This standard specifies the terms and definitions of synthetic resin floor coating materials, product classification, limits of harmful substances, and physical performance requirements, test methods, inspection rules, marking, packaging, transportation, and storage. This standard applies to floor coating materials that are applied to substrates such as cement mortar and concrete, which serve to decorate and protect floors, as well as those with special functional requirements (such as anti-static and anti-slip properties).
Development Information
Superseded by the following standards
Referenced Standards
GB/T 1728-1979
GB/T 1733-1993 Determination of resistance to water of films
GB/T 1766-1995 Paint and varnish—Rating schemes of degradation of coats
GB/T 2411-1980 Plastics—Shore hardness test
GB/T 2567-2008 Test methods for properties of resin casting boby
GB/T 4100-2006 Ceramic tiles
GB/T 6751
GB 8624-2006 Classification for burning behavior of building materials and products
GB/T 9271-1988 Paints and varnishes—Standard panels for testing
GB/T 9274-1988 Paints and varnishes—Determination of resistance to liquids
GB/T 18446-2001 Standard test method for unreacted toluene diisocyanates in urethane prepolymers and coatings solution by gas chromatography
GB 18581-2001 Indoor decorating and refurbishing materials—Limit of harmful substances of solvent coatings for woodenware
GB 18583-2001 Indoor decorating and refurbishing materials—Limit of harmful substances of adhesives
GB/T 1250-1989 Rules for expression and judgement of limiting values
GB/T 1768-2006 Paints and varnishes—Determination of resistance to abrasion—Rotating abrasive rubber wheel method
GB/T 1865-1997 Paints and varnishes—Artificial weathering and exposure to artificial radiation—Filtered xenon-arc radiation
GB/T 1865-2009 Paints and varnishes—Artificial weathering and exposure to artificial radiation—Exposure to filtered xenon-arc radiation
GB 3186-1982 Sampling paint products
GB/T 3186-2006 Paints, varnishes and raw materials for paints and varnishes—Sampling
GB/T 6682-1992 Water for analytical laboratory use—Specification and test methods
GB/T 6682-2008 Water for analytical laboratory use—Specification and test methods
GB/T 6739-1996 Determination of film hardness by pencil test
GB/T 6739-2006 Paints and varnishes—Determination of film hardness by pencil test
GB/T 6739-2022 Paints and varnishes—Determination of film hardness by pencil test
GB/T 6750-2007 Paints and varnishes—Determination of density—Pyknometer method
GB/T 9286-1998 Paints and varnishes—Cross cut test for films
GB/T 9286-2021 Paints and varnishes—Cross-cut test
GB/T 13491-1992 General rule for packing of coatings
HJ/T 201-2005 Environmental Label Product Technical Requirements: Water-based Paints
JC/T 547-2005 Ceramic wall and floor tiles adhesive
JC/T 985-2005 Cement-based self-leveling mortar for the ground
JC/T 412.2-2006 Fiber cement flat sheets Part 2:Asbestos Fiber cement flat sheets
SJ/T 10694-2006 General specification of testing method for electrostatic protection in electronic production manufacturing and using system
Related Standards
GB/T 4653-1984
Active
GB/T 4653-1984 The general technical specifications on infrared radiation paints
GB/T 5206.1-1985
Replaced
GB/T 5206.1-1985 Paints and varnishes—Vocabulary—Part 1:General terms
GB/T 5207-1985
Abolished
GB/T 5207-1985 Coatings—Determination of the danger classification by flash testing (rapid equilibrium method)
GB/T 5208-1985
Replaced
GB/T 5208-1985 Coatings—Flash point test—Rapid equilibrium method
GB/T 5209-1985
Active