JB/T 3411.25-1999

JB/T 3411.2-1999 Multiblade Size JB/T 3411.3-1999 Flexible rotating blade dimensions JB/T 3411.4-1999 "Adjusting the size of the chuck of a milling cutter." JB/T 3411.5-1999 Cutting tool handle size。 JB/T 3411.6-1999 JB/T 3411.7-1999 JB/T 3411.8-1999 JB/T 3411.9-1999 JB/T 3411.10-1999 JB/T 3411.11-1999 Round blade holder size JB/T 3411.16-1999 JB/T 3411.17-1999 JB/T 3411.18-1999 JB/T 3411.19-1999 Slider-type automatic cylindrical bushing puller chuck size JB/T 3411.20-1999 JB/T 3411.21-1999 Adjustable center joint size JB/T 3411.22-1999 Keyway rack chuck size。 JB/T 3411.23-1999 JB/T 3411.24-1999 Key slot shaving spacer size JB/T 3411.27-1999 Slotsaw blade holder size JB/T 3411.28-1999 Planer blade holder size JB/T 3411.29-1999 sharp point size JB/T 3411.30-1999 Round punch size JB/T 3411.31-1999 JB/T 3411.32-1999 Loading oil cup with pencil-sized hole using a punch JB/T 3411.33-1999 The size of a four-cornered protrusion JB/T 3411.34-1999 Six-sided socket size JB/T 3411.35-1999 inner square wrench size JB/T 3411.36-1999 JB/T 3411.37-1999 JB/T 3411.38-1999 Side port wrench, size。 JB/T 3411.39-1999 JB/T 3411.40-1999 T-shaped live hinge bar dimensions JB/T 3411.41-1999 broken cone claw dimensions JB/T 3411.42-1999 JB/T 3411.43-1999 JB/T 3411.44-1999 JB/T 3411.45-1999 JB/T 3411.46-1999 JB/T 3411.47-1999 Axial-use elastic retaining ring with installation pliers, size JB/T 3411.48-1999 Insertion pliers for elastic split ring retainers, dimensions JB/T 3411.49-1999 JB/T 3411.50-1999 Two-fingered grabber dimensions JB/T 3411.51-1999 JB/T 3411.52-1999 hammer head size JB/T 3411.53-1999 JB/T 3411.54-1999 JB/T 3411.55-1999 JB/T 3411.56-1999 JB/T 3411.57-1999 JB/T 3411.58-1999 Jack-up barge size JB/T 3411.59-1999 JB/T 3411.60-1999 JB/T 3411.61-1999 V-shape iron with clamping two sides Size。 JB/T 3411.62-1999 JB/T 3411.63-1999 Goat horn nut size JB/T 3411.64-1999 JB/T 3411.64-1999 Scalp needle - Dimensions JB/T 3411.65-1999 JB/T 3411.66-1999 JB/T 3411.67-1999 Tool transition sleeve for cone-shank tools size JB/T 3411.68-1999 JB/T 3411.69-1999 Tool with guide extension and cone-shaped shank size JB/T 3411.70-1999 JB/T 3411.71-1999 Taper collet with elastic clamping for taps size JB/T 3411.72-1999 Serrated wedge for flat-tailed conical socket dimensions JB/T 3411.73-1999 Drill chuck adapter rod size JB/T 3411.74-1999 JB/T 3411.75-1999 JB/T 3411.76-1999 JB/T 3411.77-1999 JB/T 3411.77-1999 - Screw Thread Cutting Tool Shaft for Plated Hole Drilling Machine. Dimensions of Blade Type Deep Hole Drilling Tool Shaft JB/T 3411.78-1999 JB/T 3411.82-1999 JB/T 3411.82-1999 Taper collets for safety collets for taps and drill bits. Dimensions JB/T 3411.83-1999 JB/T 3411.83-1999 Bore taper shank 90° boring bar dimensions JB/T 3411.84-1999 JB/T 3411.85-1999 JB/T 3411.86-1999 JB/T 3411.87-1999 The size of the tapper-shanked chuck boring and reaming tool guide rod JB/T 3411.88-1999 Bar-end reamer guide rod with threaded opening for blind hole。 JB/T 3411.89-1999 The size of a tapper-shank boring and reaming tool guide rod JB/T 3411.90-1999 JB/T 3411.91-1999 JB/T 3411.91-1999 Conical shank adjustable boring bar holder dimensions JB/T 3411.92-1999 7:24 cone-shank adjustable boring bar size JB/T 3411.93-1999 Replaceable cone-shank adjustable boring head dimensions JB/T 3411.95-1999 JB/T 3411.96-1999 Cutting blade holder size JB/T 3411.97-1999 The size of a face milling cutter rod used in a boring machine JB/T 3411.98-1999 JB/T 3411.98-1999 Diametral Tool Mounts for Toolholders for Radial Tooling Size JB/T 3411.99-1999 The dimensions of a boring bar for a knife holder JB/T 3411.100-1999 JB/T 3411.101-1999 Seven twenty-four conical/Mollers conical intermediate sleeve size JB/T 3411.102-1999 7:24 cone/Moseley cone long type middle sleeve size JB/T 3411.103-1999 Seven twenty-four conical/Moseley conical short type intermediate sleeve size JB/T 3411.104-1999 The intermediate sleeve of the conical/forced transmission with Moseley cone is 7:24 JB/T 3411.105-1999 7:24 cone/forced drive metric taper long intermediate housing size JB/T 3411.106-1999 JB/T 3411.107-1999 7:24 cone/flat tail Mooser cone intermediate sleeve size JB/T 3411.108-1999 JB/T 3411.109-1999 JB/T 3411.110-1999 7:24 tap-shank milling cutter rod dimensions JB/T 3411.111-1999 JB/T 3411.112-1999 Adjusting washer size JB/T 3411.113-1999 The size of the milling cutter rod sleeve JB/T 3411.114-1999 Nut Size JB/T 3411.115-1999 The diameter and length of the tapered shank with longitudinal key end mill JB/T 3411.116-1999 JB/T 3411.117-1999 7:24 cone-shank with end key end mill holder dimensions JB/T 3411.118-1999 JB/T 3411.119-1999 JB/T 3411.120-1999 Milling machine drill chuck adapter neck size JB/T 3411.121-1999 Quick change intermediate sleeve size JB/T 3411.122-1999 Fast Change Drill Bit Carrier Handle Size JB/T 3411.123-1999 Rapid replacement end mill handle dimensions JB/T 3411.124-1999 Knife pole quick change device dimensions JB/T 3411.125-1999 JB/T 3411.126-1999 JB/T 3411.127-1999

JB 3435-1983