GB/T 15543-1995
Replaced
GB/T 13395-2008
Active
National standards
GB/T 13395-2008 Regulation of hot washing for electric power apparatus
GB/T 13395-2008 Regulation of hot washing for electric power apparatus
Basic Information
Standard Code:
GB/T 13395-2008
Standard Type:
National standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Power transmission and transformation equipment
ICS Name:
The integrated transmission and distribution network
Publish Date:
2008-09-24
Implement Date:
2009-08-01
Pages:
10 pages
Scope
This standard specifies the technical conditions, flushing methods, and safety measures that should be observed during live electrical water flushing operations. This standard applies to live electrical water flushing operations of power equipment with an AC rated voltage of 10 kV to 220 kV in areas with an altitude of 1,000 m or less (excluding fixed-type water flushing).
Development Information
Replace the following standards
Referenced Standards
GB 13398-2003 Insulating hollow tubes and foam-filled tubes and solid rods for live working
GB 13398-2008 Insulating hollow tubes and foam-filled tubes and solid rods for live working
GB/T 14545-2003 Washing tools with limited quantity water for live working (Short water gun with long water column)
GB/T 14545-2008 Washing tools with limited water for live working(Short water gun with long water column)
GB/T 16927.1-1997 High-voltage test techniques Part 1:General test requirements
GB/T 16927.1-2011 High-voltage test techniques—Part 1:General definitions and test requirements
DL/T 408-2023 DL/T 408-2023 Electricity Safety Work Regulations for Electrical Part of Power Plant and Substation
Related Standards
GB/T 15544-1995
Replaced
GB/T 15544-1995 Short-circuit current calculation in three-phase a.c. systems
GB/T 18857-2002
Replaced
GB/T 18857-2002 Technical guide for live working in distribution line
GB/T 13730-2002
Active
GB/T 13730-2002 Dispatching automation systems for distric power networks
GB/T 2694-2003
Replaced
GB/T 2694-2003 Transmission line tower—Technical requirements for manufacturing
GB/T 11920-2008
Active