GB/T 6058-1985
Replaced
GB/T 8337-2011
Active
National standards
GB/T 8337-2011 Fusible plug device for gas cylinders
GB/T 8337-2011 Fusible plug device for gas cylinders
Basic Information
Standard Code:
GB/T 8337-2011
Standard Type:
National standards
Standard Status:
Active
is_force_gb:
no
CCS Name:
Pressure vessel
ICS Name:
Pressure vessels, gas cylinders
Publish Date:
2011-07-20
Implement Date:
2012-06-01
Pages:
10 pages
Scope
This standard specifies the basic requirements for the manufacture, inspection, testing, and acceptance of fusible alloy plug devices (hereinafter referred to as "fusible plug devices").
This standard applies to fusible plug devices installed on gas cylinders. For fusible alloy used in gas cylinder valves, the provisions of this standard may be referenced.
Development Information
Replace the following standards
Referenced Standards
GB/T 8335-2011 Special threads for gas cylinders
GB/T 7306.2-2000 Pipe threads with 55 degree thread angle where pressure-tight joints are made on the threads—Part 2:Taper internal and external threads
GB/T 469-1995 Lead ingots
GB/T 469-2005 Lead ingots
GB/T 469-2013 Lead ingots
GB/T 469-2023 Lead ingots
GB/T 728-1998 Ingot tin
GB/T 728-2010 Ingot tin
GB/T 728-2020 Tin ingot
GB/T 13005-1991 Terminology of gas cylinders
GB/T 13005-2011 Terminology of gas cylinders
YS/T 72-2005 Cadmium ingot
YS/T 72-2014 Cadmium ingot
YS/T 536.1-2009 Methods for chemical analysis of bismuth—Determination of copper content—Bis-acetaldehyde-oxalyldihydrazone photometric method
YS/T 536.2-2009 Methods for chemical analysis of bismuth—Determination of iron content—Electrothermal atomic absorption spectrometric method
YS/T 536.3-2009 Methods for chemical analysis of bismuth—Determination of antimony content—Melachite green photometric method
YS/T 536.4-2009 Methods for chemical analysis of bismuth—Determination of silver content—Flame atomic absorption spectrophotometric method and electrothermal atomic absorption spectrometric method
YS/T 536.5-2009 Methods for chemical analysis of bismuth—Determination of zinc content—Solid-liquid extraction-flame atomic absorption spectrophotometric method
YS/T 536.6-2009 Methods for chemical analysis of bismuth—Determination of lead content—Electrothermal atomic absorption spectrometric method
YS/T 536.7-2009 Methods for chemical analysis of bismuth—Determination of arsenic content—Atomic fluorescence spectrometric method
YS/T 536.8-2009 Methods for chemical analysis of bismuth—Determination of chlorine content—Mercuric thiocyanate photometric method
YS/T 536.9-2009 Methods for chemical analysis of bismuth—Determination of tellurium content—Coprecipitation with arsenic-oscillopolarographic method
YS/T 536.10-2009 Methods for chemical analysis of bismuth—Determination of tin content—Coprecipitation with beryllium-photometric method
YS/T 536.11-2009 Method for chemical analysis of bismuth—Determination of mercury content—Atomic fluorescence spectrometric method
YS/T 536.12-2009 Methods for chemical analysis of bismuth—Determination of nickel content—Electrothermal atomic absorption spectrometric method
YS/T 536.13-2009 Methods for chemical analysis of bismuth—Determination of cadmium content—Electrothermal atomic absorption spectrometric method
YS/T 536.14-2022 Method for chemical analysis of bismuth - Part 14: Determination of copper, lead, zinc, iron, silver, arsenic, tellurium and antimony content - Inductively coupled plasma atomic emission spectroscopy
Adopt standards
美国压缩气体协会2005版的CGA S-1.1
Related Standards
GB 12136-1989
Abolished
GB 12136-1989 Arrester for dissolved acetylene cylinders
GB/T 13003-1991
Replaced
GB/T 13003-1991 Method for pneumatic test of dissolved acetylene cylinders
GB/T 13005-1991
Replaced
GB/T 13005-1991 Terminology of gas cylinders
GB 13076-1991
Replaced
GB 13076-1991 Periodic inspection and evaluation of dissolved acetylene cylinders
GB 13077-1991
Replaced