GB/T 26873-2011 Replaced National standards

GB/T 26873-2011 Spark tester

Publish Date: 2011-07-29 Implement Date: 2011-12-01 For services related to genuine standard inquiry, procurement, translation, and other related services in China, please Contact Us

Basic Information

Standard Code: GB/T 26873-2011

Standard Type: National standards

Standard Status: Replaced

is_force_gb: no

CCS Name: Other electrical production equipment

ICS Name: Electric devices

Publish Date: 2011-07-29

Implement Date: 2011-12-01

Pages: 24 pages

Scope

This standard specifies the models, technical requirements, test methods, inspection rules, packaging, transportation, and storage of spark testers.
This standard applies to online detection in special testing equipment for wires and cables, including AC spark testers and DC spark testers operating at a frequency of 50 Hz or 60 Hz.
This standard does not apply to pulse spark testers, high-frequency spark testers, spark leak detectors, or spark testers intended for other purposes.

Development Information

Word Count: 41 Thousand words Pages: 24 pages

Superseded by the following standards

GB/T 26873-2025 Spark tester

Referenced Standards

GB/T 2423.1-2008 Environmental testing for electric and electronic products—Part 2:Test methods—Tests A:Cold GB/T 2423.2-2008 Environmental testing for electric and electronic products—Part 2:Test methods—Tests B:Dry heat GB/T 2423.4-2008 Environmental testing for electric and electronic products—Part 2:Test method—Test Db:Damp heat,cyclic(12 h+12 h cycle) GB/T 2423.10-2008 Environmental testing for electric and electronic products—Part 2:Tests methods Test Fc:Vibration(sinusoidal) GB 4793.1-2007 Safety requirements for electrical equipment for measurement, control, and laboratory use—Part 1:General requirements GB/T 6587.6-1986 Transportation tests for electronic measuring instruments GB/T 11463 GB/T 2423.5-1995 Environmental testing for electric and electronic products—Part 2:Test methods—Test Ea and guidance:Shock GB/T 2423.5-2019 Environmental testing—Part 2:Test methods—Test Ea and guidance:Shock GB/T 6587.8-1986 Line frequency and voltage tests for electronic measuring instruments GB/T 16511-1996 Electrical and electronic measuring equipment—Documentation GB/T 23644-2009 General specifications for electrical special equipment JB/T 5824.1-2008 Special equipment for cables and wires - Product classification and code - Part 1: General provisions JB/T 5824.4-2008 Special equipment for wire and cable products - Classification and designation - Part 4: Test equipment JB/T 5824.1-1991 Special equipment and product category classification and code for cables and wires - Part 1: General provisions JB/T 5824.4-1991 Special equipment and classification code for wire and cable products - Part 4: Test equipment GB/T 23644-2025 General specifications for electrical special equipment

Related Standards

GB/T 4876-1985 Abolished

GB/T 4876-1985 Line-charging current switching tests for a.c. high-voltage circuit-breaker

Publish Date: 1985-01-28

GB/T 13137-1991 Abolished

GB/T 13137-1991 Specification for 12-channel telephone carrier terminal equipment used on the symmetric pains of 2.6/9.5mm coaxial cable

Publish Date: 1991-08-15

GB/T 16316-1996 Active

GB/T 16316-1996 Specification for conduit fittings for electrical installations—Part 1:General requirements

Publish Date: 1996-05-20

GB 16926-1997 Replaced

GB 16926-1997 High—voltage alternating current switch-fuse combinations

Publish Date: 1997-07-28

GB/T 16935.1-1997 Replaced

GB/T 16935.1-1997 Insulation coordination for equipment within low-voltage systems—Part 1:Principles,requirements and tests

Publish Date: 1997-07-30

GB/T 16895.4-1997 Replaced

GB/T 16895.4-1997 Electrical installations of buildings Part 5:Selection and erection of electrical equipment Chapter 53:Switchgear and control gear

Publish Date: 1997-12-26